Honeywell Y87RFC User Manual page 2

Remote Operation
The thermostat can be controlled remotely if it is bound
to a Wireless Internet Gateway, type RFG100.
1. The Connected symbol is
displayed if the thermostat
is bound to the Gateway.
2. When the set temperature is
changed remotely a square
border will appear around
the Connected symbol.
This is only required if the gateway is purchased
separately. If the gateway is supplied with the
thermostat it will already be bound to it.
Binding your thermostat to a
RFG100 Internet Gateway
If you want to operate your Thermostat remotely or add
scheduling then you will need to use the Honeywell RFG100
Internet Gateway and bind the thermostat to it.
To do this, please follow the full installation instructions
in the RFG100 box, and at the relevant binding stage
follow these steps to connect your thermostat:
1. Touch and hold the right-hand
touch zone for about 10 seconds
to activate the binding screen.
2. Briefly touch the right-hand touch
zone once again to send the binding
signal. The and symbols will
flash until binding is successful.
Pittway Sarl, Z.A. La Pièce 4,
1180 Rolle, Switzerland
Country of origin : UK
© 2020 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used under license from Honeywell International Inc.
This product is manufactured by Resideo Technologies, Inc. and its affiliates.
3. Other possible display symbols and their meaning:
Clock
A remote time schedule
is operating, or a timed
override has been set
Lock
The temperature setting has
been fixed for an indefinite time
OFF
The thermostat has been
switched off remotely (control is
at the off temperature setting)
4. You can always check the temperature setting by turning
the dial one click. Continue to rotate the dial to change
the set temperature. This will cancel any setting made via
the app, except when the lock symbol is displayed.
3. With good reception, the
green
will then light up to confirm
successful binding.
4. After binding, the strength of the
signal between the devices will
appear on the thermostat for a
few seconds. 1 equals the lowest
strength and 5 the highest.
Then the normal screen will be
shown, including a
to confirm the Gateway and the
thermostat are now connected.
10s
5. Please refer to your Gateway
instructions to learn how to
create your online account and
download our smartphone app.
LED on the Gateway
symbol
For support:
Resideo
200 Berkshire Place
Winnersh Triangle, Berkshire
RG41 5R
Phone: 0300 130 1299
Printed in EU.