Page 1
(LED BACKLIGHT) Owner's manual Manual del propietario Manuel du propriétaire FW32D19F To obtain a more detailed electronic copy of this manual or much further contents, go to Para obtener una copia electronica detallada de este manual o mucho mayor contenido, visite...
English Contents 1 Notice 4 Making more use with your TV ......................Displaying the main menu 2 Getting started ............. Picture Sound Features Setup Included accessories Autoprogram Symbols used in this Owner’s manual Channel list Installing the stands Add channels Lifting the TV set Antenna confirmation Installing the remote control batteries...
Page 3
English Register online today at www.sanyo-av.com today to get the most benefits from your purchase. Registering your model with SANYO makes you eligible for all of the valuable benefits such as software upgrades and important product notifications. Register online at www.sanyo-av.com...
Page 4
SANUS AST16 M4 x 1.378” (35mm) FW32D19F bracket may fall which could result in a severe injury. Do not use screws that are longer or shorter than their specified Your TV meets the VESA standard for wall mounting. Consult with ●...
Any modifications to the apparatus must be approved by Funai Corporation. SANYO is a registered trademark of SANYO Electric Co., Ltd. and is The user could lose the authority to operate this apparatus if an used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under unauthorized change or modification is made.
Page 6
End of life directives to any of the services, content, software and advertising. Funai SANYO pays a lot of attention to produce environmental-friendly Corporation Inc. may, in its sole discretion, add or remove access products in green focal areas. Your new TV contains materials which to any specific services, content, software and advertising at any can be recycled and reused.
● Model Quantity Size You can set the unit to go into standby mode after a specific amount of time. FW32D19F M4 x 0.709”(18mm) Choices for on-screen language ● Select your on-screen language: English, Spanish or French. * Batteries not included, AAA 1.5V x 2 required.
English Installing the stands Lifting the TV set Remove the tape on the bottom of the TV set and the plastic Carefully lift the TV set as shown in the illustration and place it onto bag. a stable, level surface. Installing the remote control batteries Fasten the stand to the TV with 2 screws.
English Remote control a B (POWER / STANDBY) Turns the TV on from standby or off to standby mode. b PIC/SOUND MODE Optimizes picture and sound quality. c CC Selects closed caption settings (Off, On, CC w/ mute). d 0 - 9 (NUMBER keys) Used to enter a channel / program number.
English Control panel Terminals a B (POWER) Turns the TV on or switches the TV into standby mode. d USB terminal b SOURCE Data input from USB memory stick only. Selects connected devices. Do not connect any device to this terminal such as digital camera, keyboard, mouse, etc.
English Connecting antenna or cable / satellite set-top box Connecting a cable / satellite set-top box, Blu-ray Disc™ / DVD recorder via composite connectors and Be sure your antenna or another device is connected properly before analog audio plugging in the AC power cord. Do not place your recorder too close to the screen because some If connecting to an antenna through an RF cable recorders can be susceptible to signals from the TV.
HD game console Link (HDMI CEC). Note(s) HDMI-DVI connection SANYO HDMI supports HDCP (High-bandwidth Digital Contents Protection). ● HDCP is a form of digital rights management that protects high-definition content in Blu-ray Disc™ or DVDs. This unit can be connected to a device that has a DVI terminal.
Page 13
English Composite analog video connection PC connection Composite analog video connection offers standard picture quality HDMI connection for video devices connected to the unit. This unit can be connected to your PC that has an HDMI terminal. If you connect to the unit’s composite video (VIDEO) input jack, Use an HDMI cable for this digital connection.
Page 14
English USB memory stick This unit offers easy playback of picture (JPEG) and video (Motion JPEG) files. Insert the USB memory stick into the USB terminal shown below. USB L p. 31 Note(s) The unit recognizes only a USB memory stick. ●...
English These operations are accessible by remote control. Use H I to select the desired location setting, then press OK. Some may also be accessible by the main unit's control panel. Initial setup Initial setup Retail Location: This section will guide you through the unit’s Initial setting which Home “Home”...
English 3 Use your TV Switching channels Switching on your TV and putting it in standby mode Remote control To select channels by using CH + / – Press CH + / – on the remote control. ● To select channels by using the NUMBER keys To turn the TV on from standby or off to standby Press B on the unit or the remote control.
English Watching channels from an external Sleep timer device Sleep timer can set the unit to go into standby mode after an Switching each input mode can easily switch with the remote control incremental period of time. between TV (DTV or analog TV) and external devices when they are connected to the unit.
English Create a list of favorite channels Changing Pix shape You can create lists of your preferred TV channels so that you can Display modes can be selected when your TV receives a find those channels easily. 16:9 or 4:3 video signal. Three types of display modes can be selected for a PC input signal.
English For 4:3 video signal TV screen information You can display the currently selected channel or other information such as the aspect ratio on the TV screen. In the digital mode, the detailed broadcasting information for the current off the air channel, such as program title, are displayed. Normal 16:9 Movie expand...
English 4 Making more use with Use H I to select the desired menu and an item, then press OK or use H I J K to determine the setting. your TV Picture L p. 21 This section describes the overview of the main menu displayed when you press MENU.
English Picture You can set a particular picture quality using Advanced ● settings. Before you begin: You must set Home in Location. L p. 30 Color alignment Normal Picture Otherwise, personalized picture and sound settings will not be Medium Sound Noise reduction memorized after the unit goes into standby mode.
English Sound You can select audio output through a digital audio output connector. To output Bitstream signals Before you begin: (When the audio of the content is Bitstream Digital output PCM, it will be output in PCM even You must set Home in Location. L p. 30 format if Bitstream is selected.) Otherwise, personalized picture and sound settings will not be...
English Setup Autoprogram Before you begin: Make sure the unit is connected to antenna or cable. Please wait while the system is scanning for Press MENU and use H I to select Setup, then press OK. channels. Auto programming may take more than 20 minutes to complete.
English Features Add channels Display Setup using Home Menu and use H I to select This function lets you add the off the air analog TV or analog cable Features, then press OK. channels that were not added by the Autoprogram due to reception conditions during the initial setting.
Page 25
English Caption settings Cable / NTSC (Analog) TV operation Closed captions displays the audio portion of the program as superimposed text over the video. The primary closed captions and text services. The closed Use H I to select Caption settings, then press OK. CC-1 and captions or text is displayed in the same language as the...
English Child and ratings lock Note(s) You can prevent your children from watching certain programs or Closed caption will NOT be displayed when you are using an HDMI connection. ● certain channels by locking the TV controls and by using ratings. Digital caption service that you can switch differs depending on the broadcast ●...
Page 27
English Channel lock Setting US movie and TV ratings Particular channels or external input modes can be invisible in this US movie ratings lock is the rating system created by MPAA. function. US TV ratings lock has controlled access to individual programs based on their age and content rating.
Page 28
English To set the sub ratings (displayed in the right column) Canadian English or Canadian French ratings As for TV-Y7, TV-PG, TV-14 or TV-MA, you can further set the sub You can select the rating for Canadian English or Canadian French ratings to block specific elements within programs.
English Device list fun-Link (HDMI CEC) This function lets you see the product model number or name of This function allows you to operate the linked functions between our connected devices. brand devices with a fun-Link feature and this unit connecting Use H I to select the desired fun-Link devices listed on the TV through an HDMI cable.
English Language Setting your location to home Press MENU and use H I to select Language, then press OK. You can set the Location of your TV to Home or Retail. Choosing Home gives you full flexibility to change predefined settings for picture and sound.
English Picture (JPEG) Your TV is fitted with a USB connection that enables you to view Use H I to select the desired file, then press OK. JPEG photos or watch Motion JPEG files stored on a USB memory stick. Picture Connect the USB memory stick to the USB terminal on the back Image1.jpg...
Page 32
English Video (Motion JPEG) Use H I to select the desired file, then press OK. Video Video MOVIE1.avi Title: MOVIE1.avi Go to root folder Director: MOVIE1.avi Date: 2009/04/02 MOVIE2.avi Duration: 00:06:37 MOVIE3.avi MOVIE4.avi MOVIE5.avi Supported format: motion jpeg, 320 x 240, 30FPS To stop playback and return to the file list, press BACK, OK or CH + .
An archive utility that supports the ZIP-format (e.g. WinZip for ● Windows or Stuffit for Mac OS). A blank empty clean formatted USB memory stick. ● Note(s) Only FAT / DOS-formatted portable memory is supported. ● Use only software upgrades that can be found on the SANYO website. ●...
English 6 Useful tips Question Answer Check the antenna or cable connection to the main unit. ● Check the batteries on the remote control. ● Re-insert or replace the AAA batteries with their polarities (+/–) as indicated on the remote control ●...
Refer to the Owner’s manual of the universal remote control for the ● SANYO code. You see a distorted picture or hear an unusual sound. (Analog TV - NTSC signal)
English 7 Information Glossary Maintenance Analog TV (NTSC) Cleaning Acronym that stands for National Television Systems Committee and Clean the front panel and other exterior surfaces of the unit with a ● the name of analog broadcasting standards. soft microfiber cloth or lens brush. Before cleaning the panel, Off the air analog TV signals are no longer being sent by major disconnect the AC power cord.
English 8 Specifications Model # FW32D19F Picture WXGA (1366 x 768 pixels 60Hz) Type 31.5”/ 16:9 Diagonal screen size / Aspect ratio 178° (V) by 178° (H) Viewing angles Built-in digital / analog tuner ATSC (digital) / NTSC (analog) Sound...
To obtain assistance… Contact the Customer Care Center at: Replacement product can only be sent if all warranty requirements www.sanyo-av.com are met. Failure to follow all requirements can result in delay. 1 866 212 0436 What is not covered - Exclusions and limitations:...