Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NEC IE-V850E-MC
Summary of Contents for NEC IE-V850E-MC
- Page 1 User’s Manual IE-V850E-MC, IE-V850E-MC-A In-Circuit Emulator Target Devices V850E1 (NB85E Core) V850E/MA1 V850E/MA2 V850E/SV2 V850E/IA1 V850E/IA2 Document No. U14487EJ2V0UM00 (2nd edition) Date Published September 2003 N CP(K) 1999 Printed in Japan...
- Page 2 [MEMO] User’s Manual U14487EJ2V0UM...
- Page 3 NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
- Page 4 Regional Information Some information contained in this document may vary from country to country. Before using any NEC Electronics product in your application, pIease contact the NEC Electronics office in your country to obtain a list of authorized representatives and distributors. They will verify: •...
- Page 5 1.4 System Configuration • Addition of SWEX-xxxSD-1 as extension probe • Addition of descriptions about connector configurations p.17 1.6.1 When using IE-V850E-MC-A on a standalone basis for performing software debugging • Addition and modification of descriptions p.18 1.6.2 When performing hardware debugging with target system •...
- Page 6 V850E-MC-A) connected to a dedicated option board when designing and developing application systems using V850E1, V850E/MA1, V850E/MA2, V850E/SV2, V850E/IA1, and V850E/IA2 microcontrollers. The purpose of this manual is to describe the proper operation of the IE-V850E-MC and IE-V850E-MC-A and their basic specifications. Organization This manual is broadly divided into the following parts.
- Page 7 Product Name in This Manual In this manual, unless otherwise specified, the IE-V850E-MC-A is treated as the representative model. When this manual is used as the IE-V850E-MC manual, replace IE-V850E-MC-A with IE-V850E-MC. For the functional differences between the IE-V850E-MC and the IE-V850E-MC- A, refer to CHAPTER 1 OVERVIEW.
-
Page 8: Table Of Contents
1.4 System Configuration ......................14 1.5 Contents in Carton ........................ 15 1.6 Setup............................17 1.6.1 When using the IE-V850E-MC-A on a stand-alone basis for performing software debugging ..17 1.6.2 When performing hardware debugging with target system ............18 CHAPTER 2 PART NAMES AND FUNCTIONS................ - Page 9 2-4 Pod (Bottom View)..............................22 3-1 Connecting to Target System ..........................25 3-2. Direction Marking for Pin 1 of Connector (Top View) ....................29 3-3 Connection of IE-V850E-MC-A to Target System ....................30 3-4 Power Adapter Connection............................31 3-5 PC Interface Cable Connection ..........................31 3-6 External Logic Probe Connection (Using IC Clip)....................32...
-
Page 10: Chapter 1 Overview
CHAPTER 1 OVERVIEW The IE-V850E-MC-A and IE-V850E-MC are in-circuit emulators that are used to efficiently debug hardware and software during the development of systems that employ the V850E1, V850E/MA1, V850E/MA2, or V850E/SV2, and the V850E/IA1 or V850E/IA2, respectively. They incorporate functions such as a break/trace function using events, a coverage function for program performance evaluation, and a timer/counter function. -
Page 11: Hardware Configuration
CHAPTER 1 OVERVIEW 1.1 Hardware Configuration In-circuit emulator (IE-V850E-MC-A) Separately sold hardware Option board The IE-V850E-MC-A can be used as an in-circuit IE-703107-MC-EM1 emulator of the V850E1, V850E/MA1, V850E/MA2, IE-703114-MC-EM1 V850E/SV2, V850E/IA1, and V850E/IA2 by IE-703116-MC-EM1 connecting these boards. IE-703166-MC-EM1 Extension probe General-purpose extension probe. -
Page 12: Features
500 g Operating temperature range 0 to 40°C Storage temperature range 0 to 45°C Ambient humidity range 10 to 80% RH Note The power consumption is 11.4 W when the option board is connected to the IE-V850E-MC-A. User’s Manual U14487EJ2V0UM... -
Page 13: Function Specifications
RAM sampling function Note External emulation memory is not mounted on the IE-V850E-MC-A. External emulation memory is mounted on the separately-sold option board, so refer to the option board user’s manual. Caution Some of the functions may not be supported depending on the debugger used. -
Page 14: System Configuration
CHAPTER 1 OVERVIEW 1.4 System Configuration The system configuration when connecting the option board to the IE-V850E-MC-A, which is then connected to a personal computer (PC-9800 series, PC/AT or compatible) is illustrated below. The connector configuration varies depending on the target device. For details, refer to the user’s manual of the option board. -
Page 15: Contents In Carton
CHAPTER 1 OVERVIEW 1.5 Contents in Carton The carton of the IE-V850E-MC-A contains a main unit, guarantee card, packing list, and accessory bag. Make sure that the accessory bag includes this manual and cables. In case of missing or damaged contents, please contact an NEC Electronics sales representative or distributor. - Page 16 CHAPTER 1 OVERVIEW Check that the accessory bag contains this manual, an accessory list, and the following accessories. (a) PC interface cable × 2 (for the IE-70000-PCI-IF, IE-70000-PCI-IF-A × 1, for the IE-70000-CD-IF-A × 1) (b) Plastic spacer × 2 sets (including 2 plastic screws and 2 washers) (c) Nylon rivet ×...
-
Page 17: Setup
CHAPTER 1 OVERVIEW 1.6 Setup The following two system configurations for the IE-V850E-MC-A are possible, depending on the purpose. This section describes the setup procedure according to each purpose as follows. Step Reference section 1.6.1 When using the IE-V850E-MC-A on a standalone basis for performing software debugging Connect interface board to PC 3.1 Connection to Personal Computer... -
Page 18: When Performing Hardware Debugging With Target System
Before turning on the power of the target system, make sure that the power of the IE-V850E- MC-A is turned on. If the target system is turned on while the IE-V850E-MC-A is off, the target system or the IE-V850E-MC-A may be damaged. -
Page 19: Chapter 2 Part Names And Functions
CHAPTER 2 PART NAMES AND FUNCTIONS This chapter describes the name and function of each part of the IE-V850E-MC-A, as well as switch settings. Figure 2-1. IE-V850E-MC-A Main unit User’s Manual U14487EJ2V0UM... -
Page 20: Main Unit Part Names And Functions
Power switch Power jack (1) Power switch This is the main power ON/OFF switch of the IE-V850E-MC-A. The ON/OFF direction is printed on the chassis of the main part. (2) Power jack A power adapter (IE-70000-MC-PS-B: sold separately) is connected here. -
Page 21: Pod Part Names And Functions
CHAPTER 2 PART NAMES AND FUNCTIONS 2.2 Pod Part Names and Functions Figure 2-3. Pod (Top View) Direction of A1 pin on emulation CPU Emulation CPU Memory FPGA (1) Test pins TP1: For shipment test TP2: Ground TP3: Ground (2) JP2 The setting varies depending the option board to be set. - Page 22 CHAPTER 2 PART NAMES AND FUNCTIONS Figure 2-4. Pod (Bottom View) Option board connection pin (1) Option board connection pin Connect this pin to the PGA socket on the option board (sold separately) side. User’s Manual U14487EJ2V0UM...
-
Page 23: Chapter 3 Connection Of Components
For details of software startup, refer to the user’s manual of the debugger that is used. 3.1 Connection to Personal Computer 3.1.1 Overview of connection The IE-V850E-MC-A can use a personal computer (PC-9800 series, or PC/AT compatible) as the host machine. The connection to each type of personal computer is described below. (1) Desktop PC When using a desktop PC, insert the following PC interface board in the external expansion slot of the desktop PC and connect the computer to the IE-V850E-MC-A. -
Page 24: Insertion Of Pc Interface Board
CHAPTER 3 CONNECTION OF COMPONENTS 3.1.3 Insertion of PC interface board Mount the PC interface board on the PC following the instructions described in the user’s manual of the PC. When connecting the IE-70000-PCI-IF or IE-70000-PCI-IF-A, turn off the power to the PC first. 3.1.4 Connection of PC interface cable Connect the PC interface cable to the interface board connector. -
Page 25: Connection To Target System
CHAPTER 3 CONNECTION OF COMPONENTS 3.2 Connection to Target System There are two connection methods: connecting the connection tab of the option board to the target system directly and connecting the connection tab of the option board to the target system via an extension probe. (1) Connect the connectors to the target system. - Page 26 CHAPTER 3 CONNECTION OF COMPONENTS Figure 3-1. Connecting to Target System (2/5) (b) When the target device is the V850E/MA2 VP-V850E/MA1-MA2 <4> YQGUIDE <3> <3> YQPACK100SD <2> NQPACK100SD <1> Target system <1> Fix to the specified position by soldering. <2> Insert. <3>...
- Page 27 CHAPTER 3 CONNECTION OF COMPONENTS Figure 3-1. Connecting to Target System (3/5) (c) When the target device is the V850E/IA2 (GF package) NEXB-2R100SD/RB <4> YQGUIDE <3> <3> YQPACK100SD <2> NQPACK100SD <1> Target system <1> Fix to the specified position by soldering. <2>...
- Page 28 CHAPTER 3 CONNECTION OF COMPONENTS Figure 3-1. Connecting to Target System (4/5) (d) When the target device is the V850E/MA1 (BGA package) YQGUIDE <4> <4> CSICE161A1413N02 <3> LSPACK161A1413N01 <2> Note CSSOCKET161A1413N01N <1> <1> Fix to the specified position by soldering. (Align the misinsertion prevention pins of both the CSSOCKET and the target system sides.) <2>...
- Page 29 CHAPTER 3 CONNECTION OF COMPONENTS Figure 3-1. Connecting to Target System (5/5) (e) When the target device is the V850E/SV2 CSICE257B2014N01 <2> BSSOCKET257B2014N01 <1> Target system <1> Fix to the specified position by soldering. (Align the misinsertion prevention pins of both the BSSOCKET and the target system sides.) <2>...
- Page 30 (a) When connecting to target system directly <1> Turn off the power of the IE-V850E-MC-A (power switch OFF). <2> Connect the IE-V850E-MC-A to the option board. <3> Connect the connection tab of the option board to the target system.
-
Page 31: Cable Connections
Figure 3-4. Power Adapter Connection Power jack Power adapter (IE-70000-MC-PS-B) 3.3.2 PC interface cable connection Connect the PC interface cable to the PC interface connector of the IE-V850E-MC-A main unit. Figure 3-5. PC Interface Cable Connection PC interface connector PC interface cable... -
Page 32: External Logic Probe Connection
For details, refer to the option board user’s manual. 3.3.4 Additional information The IE-V850E-MC-A can perform real-time tracing of the emulation CPU bus cycle. In addition, an external logic probe is included with the option board for the following three functions. -
Page 33: System Power-On And Power-Off
(1) Turn on the power switch of the IE-V850E-MC-A. Set the power switch to “ON” after connecting the power adapter to the power jack of the IE-V850E-MC-A and the plug to the power outlet. (2) Turn on the power of the target system. -
Page 34: Chapter 4 Shipment Settings
CHAPTER 4 SHIPMENT SETTINGS Item Setting Description After shipment, the jumper is set with 1 and 2 shorted and 7 and 8 shorted. The setting varies depending on the option board, so for how to set, refer to the user’s manual of the option board. -
Page 35: Appendix Adimensions
APPENDIX A DIMENSIONS Top View Side View Bottom View (Unit: mm) User’s Manual U14487EJ2V0UM... -
Page 36: Appendix B Revision History
1.4 System Configuration • Addition of SWEX-xxxSD-1 as extension probe • Addition of descriptions about connector configurations 1.6.1 When using IE-V850E-MC-A on a standalone basis for performing software debugging • Addition and modification of descriptions 1.6.2 When performing hardware debugging with target system •...