VAVA Baby Night Light VA-CL009 Manual

VAVA Baby Night Light VA-CL009 Manual

Advertisement

VAVA Baby Night Light VA-CL009 Manual

Product Diagram

Product Diagram Step 1
Product Diagram Step 2

  1. Touch Control
  2. Power Switch
  3. Timer Button
  4. LED Indicator
  5. Multicolor Light Mark
  6. Warm Light Mark
  7. Off Mark
  8. USB Charging Port

Specifications

Power 1.5W
Luminous Flux 100lm
Battery Capacity 2000mAh
Charging Time 3.5h
Working Time on a Full Charging 7h (highest brightness)
100h (lowest brightness but not night light mode)
Working Voltage DC 5V 1A

How to Use

How to Use

NOTE:

  • When the battery level is lower than 20%, the LED indicator will turn red. · The LED indicator will keep blinking when charging and stay solid blue once fully charged.
  • In standby mode, the LED indicator will blink on and off for easy locating in the dark.

Warm Light Mode

Warm Light Mode

  1. Toggle the Power Switch to Warm Light Mark.
  2. Tap the Touch Control twice to turn on / off the light.
  3. Tap and hold the Touch Control to adjust the light brightness, release at the desired level. Tap and hold it again to adjust the brightness to the opposite direction.

Multicolor Light Mode

 Multicolor Light Mode

  1. Toggle the Power Switch to Multicolor Light Mark to enter automatic color carousel, where several color will cycle through.
  2. Tap the Touch Control once to stay in current color, tap it again to resume color carousel. The LED indicator will flash twice to confirm your setting.
  3. Tap the Touch Control twice to turn on / off the light.

Memory Function

The Memory Function is enabled only in Standby mode.

Warm Light Mode/ Multicolor Light Mode

  1. To enter the Standby mode, tap the Touch Control twice and the light will turn off indicating the light is under Standby mode.
  2. Tap the Touch Control twice again, the light will turn on and remain the last setting for Brightness (in Warm Light Mode) or Color Temperature (in Multicolor Light Mode).

NOTE:
Do not toggle the Power Switch to OFF, or it will exit the Standby mode and reset the night light.

Night Light Mode

When the light is in Standby mode, tap and hold the Touch Control for 1 second to enter night light mode.

NOTE:
Night light mode is enabled only in Warm Light Mode.

Timer Setting

When the light is on, press the Timer Button once to set 1 hour timer with the LED indicator turning green.

  • Do not attempt to alter or repair the unit. Return to the manufacturer for repairing.
  • If a bad odor or an unusual operation is detected, turn off immediately.
  • Do not place near any heat source, moisture, or corrosive substances.
  • Regularly clean the lamp with a dry cloth.
  • If not in use, regularly clean the unit. Store in a dry and cool place.
  • Use a 5V power adapter only, as other adapters may damage the product.

www.vava.com

E-mail
support@vava.com

Manufacturer:
Shenzhen NearbyExpress Technology Development Co.,Ltd. Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China

Learn more about the EU Declaration of Conformity:
https://www.vava.com/pages/user-manual

Videos

Vava VA-CL009 - Review Video

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download VAVA Baby Night Light VA-CL009 Manual

Advertisement

Need help?

Need help?

Do you have a question about the VA-CL009 and is the answer not in the manual?

Questions and answers

Table of Contents