Mocka Hamptons Assembly Instructions

Dining table

Hide thumbs Also See for Hamptons:

Download this manual

Hamptons Dining Table

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

55mm screw

30mm screw

screw pin

dowel

Hardware Supplied

mocka.co.nz | mocka.com.au |

spring

washer

x14

x18

allen key

Read the instructions carefully. Refer to the hardware and furniture parts list for

guidance. Be sure all of the pans are complete before assembling. Place all of the

wooden furniture parts on a clean and ﬂat soft surface to prevent scratches.

Refer to the steps provided as an assembling guide.

CAUTION :

1. Do not tighten the nuts or nut bolts completely until they are all in place.

2. To avoid thread damage, avoid overtightening nuts or nut bolts.

3. Hardware is to be kept out of reach of children.

Page 1 Hamptons Dining Table Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. spring 55mm screw 30mm screw washer screw pin dowel allen key Hardware Supplied Read the instructions carefully. Refer to the hardware and furniture parts list for guidance.
Page 2 Hamptons Dining Table Assembly Instructions Attach 1 x table leg (2) to 1 x cental rail (3) to 1 x table top (1) and Attach 1 x cental rail (3) to 1 x table leg (2) to assembled frame and...
Page 3 Hamptons Dining Table Assembly Instructions Attach 2 x support bars (4) to assembled frame and secure with 2 x Once assembled lift furniture into place, do not drag. Ensure unit 35mm screws (B), 4 x spring washers (C) and 2 x 55mm screws (A).