Advertisement
6. Windows 95 Driver Installation
6. Windows 95 Driver Installation
The following files are supplied for driver installation, they are put in the \WIN95
subdirectory for Windows 95.
-DA2000.MPD:
ASUS PCI-DA2000 Series family Miniport Driver for Windows
95.
-DAW95.INF :
Information file for driver installation.
6.1.
Installing Windows 95 and the driver
1 Use ASUS PCI-DA2000 Series BIOS Configuration Utility to disable ISA Mail-
box Emulation Mode (default is disabled). To do this, at system bootup, press
[Ctrl-I], select Configure Card option, then change IO Port Address to DIS-
ABLED.
2 Use ASUS Text RAID Manager or RS-232 Terminal Interface to configure Logi-
cal Drives and SCSI Devices and map them to valid SCSI-IDs/LUNs.
Note that SCSI ID 7 is reserved for the ASUS PCI-DA2000 Series controller
and thus no logical drives or devices should be mapped to this SCSI ID.
3 Follow the instructions in Windows 95 installation documentation to install
Windows 95.
4 When Windows 95 installation is complete, restart Windows 95.
5 Click on the "Start" button on the task bar of Windows 95.
6 Select "Settings", and then click on "Control Panel".
7 Double-click on the "System" icon, then click on "Device Manager" tab.
8 Click on the plus sign next to the "Other devices" icon, then Double-click on the
yellow question mark labelled "PCI SCSI Bus Controller" icon, then click on
the "Driver" tab.
9 In the Driver tab, click on "Change Driver". When asked to select hardware
type, select "SCSI Controllers".
ASUS PCI-DA2000 Series RAID Controllers Driver Installation
61
Advertisement
