Enable The Power On Password; Use Firewalls Programs - Lenovo 10w User Manual

2. Select Security ➙ Set User Password and press Enter.
3. Enter the current password.
4. In the Enter New Password field, enter the new password.
5. In the Confirm New Password field, enter the new password again.
Note: If you want to remove the password, select Security ➙ Clear User Password and press Enter.
6. Select Exit ➙ Exit Saving Changes.

Enable the power on password

If the administrator password has been set, you can enable the power on password to enforce stronger
security.
1. Enter the setup utility.
2. Select Security ➙ Power-on Password and press Enter.
Note: The administrator password must be set in advance.
3. Change the setting to Enabled.
4. Select Exit ➙ Exit Saving Changes.
If the power on password is enabled, you must enter the administrator password or user password every
time you enter the setup utility.

Use firewalls programs

Your tablet might be preinstalled with a firewall program. The firewall protects against tablet Internet security
threats, unauthorized access, intrusions, and Internet attacks. It also protects your privacy.
For more information, see the help system of the program.
.
Chapter 4 Configure advanced settings
19