Trc-8546 Specifications - NI TRC-8546 Getting Started

Condition/State
Open session on hardware, port is missing power
Hardware is communicating

TRC-8546 Specifications

The following specifications are typical for the range -40 °C to 70 °C unless otherwise
noted.
LIN Characteristics
Transceiver
Max certified baud rate
LIN bus lines voltage
Supply voltage range (V
MTBF
Power Requirements
Thermal dissipation (at 70 °C)
Power consumption from NI-XNET
Transceiver Cable host
Power consumption from V
Physical Characteristics
To clean the TRC-8546, wipe it with a dry towel.
NXP TJA1028
20 kbps
-40 VDC to +40 VDC
) +8 VDC to +18 VDC normal operating; -0.3 VDC to +40 VDC absolute
SUP
limits
Contact NI for Bellcore MTBF specifications at other temperatures or
MIL-HDBK-217F specifications.
650 mW max (active mode); 330 mW typical (active
mode)
330 mW max (active mode); 150 mW typical (active
mode)
320 mW max; 180 mW typical
SUP
TRC-8546 Getting Started
LED 1 LED 2
Solid red Off
Solid green Activity green (returns to
idle/off one second after last
TX or RX)
11
© National Instruments