Skullcandy Uproar Wireless Headphones Manual

1. Main Function Button
2. Volume Up Button
3. Volume Down Button
4. LED
5. USB Charging Port
6. Mic

Power On – Press and hold the MFB until the LED flashes blue and the ascending tone plays through the headphones.
Power Off – Press and hold the MFB until the LED turns RED and the descending tone plays through the headphones.
Pairing – While power is off, hold the MFB until the LED alternates flashing BLUE and RED.
Un-pairing – Press and hold the volume up and volume down buttons until you hear two short tones.
Pause – Press the MFB once to pause and once again to play.
Volume Up – Press the volume up button. A tone will sound at maximum volume.
Volume Down – Press the volume down button. A tone will sound at minimum volume.
Next Track – Press and hold the volume up button.
Previous Track – Press and hold the volume down button.
Answer Call – While paired, press the MFB once.
Hang Up Call – Press the MFB once.
Charging –The LED will be Red while charging and turn Blue once fully charged.
Low Battery – The LED will flash Red and a tone will sound 4 times.