Advertisement
Chapter Overview
an overview of the FieldMonitor Machinery Protection System
•
a description of the components of the system
•
the basics of Flexbus communication
•
1.1 System
Overview
1. System Description
This chapter provides:
The FieldMonitor system is a distributed vibration monitor system that
physically and functionally integrates with distributed I/O,
programmable logic controllers, distributed control systems, and PC-
based control systems. The system is used with the Allen-Bradley Flex
I/O or Flex Ex distributed I/O products and communicates over
industry standard networks using Allen-Bradley and third-party Flex
I/O network adapters or Flex Ex serial bus isolator and network
adapters.
A distributed vibration protection system is an alternative
to larger rack-based systems or vibration transmitters
when...
the vibration protection system integrates with a
•
machine control system that uses distributed I/O over
appropriate networks,
vibration parameters display on the Human Machine
•
Interface (HMI) for the machine control system,
you want local, "on-skid" mounting,
•
it is more efficient and economical to connect vibration
•
points to a distributed FieldMonitor systems than to wire
all points to a central rack-based system,
the application can benefit from proper connectivity to
•
diagnostic and machinery management systems,
reduction or elimination of field wiring, and the integrity
and robustness of a system possessing self-check and
self-contained alarm capabilities, or
protection over a network is acceptable.
•
Section 1 - System Description
1
Advertisement
