Disassembly And Assembly; Introduction - ABB HT575423 Operation Manual

Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
8 Disassembly and assembly / 8.1 Introduction

8 Disassembly and assembly

8.1 Introduction

© Copyright 2018 . All rights reserved.
CAUTION
Further work
Further tasks, which are not described here, may be carried out only by
trained personnel from an ABB Turbocharging service station.
Only carry out those tasks that are described in this chapter.
u
Mark the casing position for assembly.
u
Identifying assembly devices
Not all assembly devices are marked with a part number. They can be
identified using the tool list. This list is enclosed in the toolbox.
WARNING
Maintaining assembly devices
Assembly devices must be checked for damage before and after use.
Visually check for corrosion, cracks, deformation and wear.
u
Don't use damaged assembly devices, but replace them.
u
Customer spare parts set
Before beginning work, ensure that the required customer spare parts
sets are available.
See chapter Spare parts.
u
HZTL2498_EN Revision C April 2018