Dock Desk; Selecting The Location Of The Dock Desk; Connecting The Dock Desk To The Power Supply - Hill-Rom Trumpf Medical iLED 7 Instruction Manual

55000-00004_030_01 – 2070134 – 2018-01-04
1
1
2
3
4
5
7.4

Dock desk

7.4.1

Selecting the location of the Dock desk

The Dock desk ① must
stand on a straight, level surface
•
stand in a location in which neither the Dock desk
•
① nor the Control lying on it can inadvertently be
knocked down.
ATTENTION
Do not operate the non-sterile Dock desk in
the sterile operating area.
1. Set up the Dock desk ① in a suitable location.
7.4.2 Connecting the Dock desk to the power
supply
The Dock desk ① is connected to the hospital's power
supply via a power pack. The power pack is equipped
with a special flanged plug ② for connection to the
Dock desk ① and a power pack with a plug for
connection to a socket.
1. Plug the flanged plug ② into the corresponding
socket on the Dock desk ① according to the white
marking.
2. Thread the mains cable ④ into the three cable
holders ③ and guide it out of the cable opening
⑤ on the Dock desk ①.
3. Plug the mains unit adapter into a power socket.

Testing the components of the device
Contact with live device components may lead
to fatal electric shock.
• Check plug and power cable for damage
prior to connection to the mains power
supply.
• Do not connect damaged plugs or cables
to the mains.
7 Commissioning
WARNING
61