Daily Inspection And Maintenance - Rinnai RDT-62-CH-W Operating Instructions Manual

Daily Inspection and Maintenance

日常点检和护理
•
Is the power cord damaged?
电源线上是否有伤痕？
– Inspect the power cord for damage and the power plug for accumulation of dust.
(See pages 6 and 11.)
请点检电源线是否有伤痕、 电源插头上是否有灰尘积聚。
（参照第6、 11页。 ）
•
Is the lint filter or air inlet filter blocked with dust? Are the filters set correctly in place?
线屑过滤器和鲜风过滤器上是否有灰尘堵塞？ 是否已正确安装?
– Check the filter cleaning lamp to see if it is lit or blinking. (See pages 22, 24 and 49.)
请确认过滤器清扫指⽰灯是否点灯或闪烁。 （ 参照第22、 24、 49页。 ）
– Check the air inlet filter to see if it dust is building up. (See pages 19 and 48.)
请确认鲜风过滤器是否有灰尘堵塞。 （ 参照第19、 48页。 ）
– Check the lint filter and air inlet filter to see if they are set correctly in place. (See pages 47 to 50.)
请确认线屑过滤器和鲜风过滤器已正确安装。 （ 参照第47至50页。 ）
Preparing for maintenance
1. Stop operation, and make sure that the equipment has sufficiently cooled down.
确认运行已停止、 机器已充分冷却。
2. Close the gas cock.
关闭燃气阀。
3. Remove the power plug from the power outlet.
将电源插头从插座拔出。
4. Put on gloves before starting daily maintenance.
带上手套,开始护理。
Note 敬请注意
• If the operation indicators or warning labels attached to the equipment become dirty or are no longer legible, wipe off dirt with
a soft, dry cloth.
机器机身上贴的操作方法标签和警告标签变脏、 看不清时， 请用软布将污垢擦掉。
Performing Daily Maintenance
建议坚持日常点检
护理准备
46