Printing Network Interface Status Page - Kyocera FS-2000D Advanced Operation Manual

Using the Operation Panel
2-36
Printing a Network Interface Status Page
You can have your printer print out a network status page when the printer
prints the status page. The network status page shows the network
addresses, and other information under various network protocols about
the network interface card. The default setting is Off (print disable).
NOTE:
Printing out a network interface status page may not be possible
with the optional network interface card. For details, refer to the manual
for the network interface.
1 Press [Menu].
Press ? or @ repeatedly until Interface > appears.
2
3
If the current interface is other than
Network, press [OK]. A blinking question
mark (?) appears.
Press ? or @ repeatedly until Network
4
appears. Press [OK].
Press B and then press ? or @ repeatedly
5
until the display shows >Network Status
Page.
6
Press [OK]. A blinking question mark (?)
appears.
Press ? or @ to select On.
7
8 Press [OK] again.
Interface
? Parallel
Interface
? Network
>Network Status
Page Off
>Network Status
Page ? Off
>Network Status
Page ? On
ADVANCED OPERATION GUIDE