Table of Contents
Advertisement
-
Last pinfall, Last Key. The last pinfall received from the APS is displayed, as
is the last key pressed.
There are also a number of test screens which can be used to check the display
quality of the overhead monitors. Use the L and R keys to step through the screens.
On touch screen systems, a grid will be displayed on the touch screen during
testing. You can use this grid to test the accuracy of the touch screen. If the touch
screen is not accurate (that is you touch the screen and a button other than the one
under your finger is activated) then the touch screen requires calibration.
To calibrate the touch screen, press the CAL button, then touch each box as
prompted as accurately as you can.
There are also four sensitivity levels for the touch screen, SENS-0 to SENS-3.
Touch SENS-0 to use the lowest sensitivity, as this is suitable in most cases.
6.2 Computer BIOS will not start
When the computer is switched on, you should see the normal BIOS startup of the
motherboard. This may include memory tests, copyright messages etc. If this does
not appear, try removing all the cards except one video card and try again.
If this fails then you have a faulty motherboard or video card. Check the
motherboard configuration. Consult the motherboard manual for more information.
If the motherboard now starts, try reinserting each card one by one. Check the
configuration of each card. Try the video cards in different slots. Check the BIOS
configuration, ensure no on board I/O on the motherboard conflicts with any cards.
If the motherboard still will not run, try a different motherboard or video cards.
The type you have may not be compatible.
6.3 ALS program will not start
If the BIOS startup messages appear as normal, but the TESTING WAIT startup
message from the ALS board does not appear, then the ALS program has not
started.
Ensure that the BIOS has not halted due to an error, such as no keyboard present.
You must setup the BIOS so that it will still start without keyboards, hard drives
etc being attached. See the BIOS manual for more information.
Page 38
Advertisement
Table of Contents
