Do you have a question about the FH-6918S and is the answer not in the manual?
Questions and answers
Summary of Contents for GardenJoy FH-6918S
Page 1
MODEL:FH-6918S Thank You For Choosing GardenJoy SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put this manual in a safe dry place for future reference.
IMPORTANT SAFETY INSTRUCTIONS WARNING: Read all safety warnings & instructions. Failure to follow the warnings and instructions may result in electric shock or injury. Save all warnings and instructions for future reference. Work area safety • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
Page 4
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
Page 5
If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. • Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control. •...
Page 6
platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Do not drill, fasten or break into existing walls or other blind areas where electrical wiring may exist. If this situation is unavoidable, disconnect all fuses or circuit breakers feeding this work site.
• When removing the bit from the tool avoid contact with skin and use proper protective gloves when grasping the bit or accessory. Accessories may be hot after prolonged use. • BATTERY WARNINGS: • • Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and product using battery.
Page 8
reduce the risk of electric shock. Removing the battery pack will not reduce this risk. • The charger is designed to operate on standard household electrical power (100-240 volts, 50-60 Hz AC only). Do not attempt to use it on any other voltage. •...
• The battery should be stored in a cool, dry place, away from direct sunlight. • When storing the battery, do not mix it with metal objects. PRODUCT SPECIFICATION MODEL FH-6918S CHARGER ADAPTER INPUT 120V-240V AC50-60HZ CHARGER ADAPTER OUTPUT 21V DC...
Name of Accessories Use of Accessories For drilling wood, ordinary steel, aluminum, plastic and other materials. HSS Twist Drill Bits NOTE: The drill bit is made of ordinary carbon steel and is (3mm 4mm 5mm 6mm 8mm) not suitable for drilling hardened metal materials after heat treatment.
Page 12
How to install the drill bit? Note: To protect the top of the chuck, the chuck was not stick out. Note: Please put the drill bit in the center of the chuck, otherwise the drill bit will shake during use. Step 1: One hand stuck on the middle ring (point B), and the other hand rotate the chuck (point A) anticlockwise to open the chuck jaws.
Page 13
Variable Speed Trigger The variable speed switch enables you to select the best speed for a particular application. The more you squeeze the trigger, the faster the tool will operate. Use lower speeds for drilling in metals or plastics, or driving screws. 2-Speed The variable speed allows you to control the drilling speed.
Build in LED Light An LED work-light enabling you to safely drill in hard to see areas, LED light illuminates any dark work space POST-SALE CONTACT INFORMATION Do you have any of the following questions? 1. You can not charge the battery 2.
Need help?
Do you have a question about the FH-6918S and is the answer not in the manual?
Questions and answers