Advertisement
TRANSDUCER CONNECTIONS
The Series AP5103 I/O CONNECTIONS are via non-removable screw terminals which will
accept wire sizes from AWG 12 to 26. NOTE: The recommended transducer
cabling would be eight wire, individually shielded, twisted pair - wired as indicated (Fig. 1)
Sense lines must be connected at the transducer (as recommended) or at the AP5103
screw terminals - as a minimum. Table 2 denotes screw terminal assignments.
Table 2 Series AP5103 Pin Assignments
Fig. 1 Series AP5103 Transducer Cabling
4 of 9
Advertisement
