Vertical Misalignment Or Banding - Epson STYLUS PHOTO 2000P Instruction Manual

❏ Run the Head Cleaning utility to clear any clogged ink
nozzles.
❏ Select Automatic as the Mode setting on your printer driver's
Main menu (Windows) or in the Print dialog box (Macintosh).
❏ Check the B black and A color ink out lights. If a light is
flashing, replace the ink cartridge. See "Replacing an Ink
Cartridge" on page 7-2.
❏ Make sure that Maximum is not selected as the Printable Area
setting in your printer driver. When this setting is selected,
banding may occur in the expanded area.
❏ Make sure the Media Type selected in the printer driver is
appropriate for the type of media loaded in the printer.

Vertical misalignment or banding

Try one or more of these solutions:
❏ Make sure the printable side of the paper is face up in the sheet
feeder.
❏ Run the Print Head Alignment utility.
❏ Clear the High Speed check box in your printer driver. For
instructions, see "Using the Advanced settings" on page 2-11
for Windows. For Macintosh, see "Using the Advanced
settings" on page 4-8.
❏ Run the Head Cleaning utility to clear any clogged ink
nozzles.
❏ Make sure the Media Type setting selected in the printer
driver is right for the type of media loaded in the printer.
9-10
Troubleshooting