Table of Contents
Advertisement
AMC2 4W | Installation manual
3.4
System Overview
The Access Controller AMC2 4W is connected between the
management host system and different peripheral devices. By
default a management host system is connected via Ethernet. A
management host connection via RS-485 or RS-232 is also pos-
sible.
Fig. 3.6 System overview
In RS-485 mode up to eight access controllers AMC2 4W can be
combined on one party line. Via Wiegand interfaces up to four
peripheral devices can be connected to each AMC2 4W.
Bosch Sicherheitssysteme GmbH
Introduction | en 21
F.01U.024.965 | V 0.1 | 2006.03
Advertisement
Table of Contents
