Spare Parts; Product Troubleshooting - Favero Electronics ASSIOMA UNO User Manual

E N G L IS H
technician, authorized by Favero Electronics.

20. Spare parts

For more information on spare parts, visit the website cycling.favero.com.

21. Product troubleshooting

Over- or underrated power
• Perform manual calibration (Chap. 10).
• Check if there is any contact between the shoe, or shoe cover, and the sensor
(Chap. 8.2).
• Check the setting of the crank-arm length (Chap. 9.3).
Faulty left/right balancing
• Perform manual calibration (Chap. 10).
• Check if there is any contact between the shoe, or shoe cover, and the sensor (Chap. 8.2).
Cadence and power are not displayed
• Activate the product (Chap. 6).
• Configure the bike computer (Chap. 9).
• Perform manual calibration (Chap. 10).
• Ride uniformly to allow self-calibration (Chap. 11).
The LEDs do not switch on
• Fully charge the product (Chap. 12).
• Make sure that the battery charger and the cables supplied are correctly
working (Chap. 12) or use a common smartphone battery charger.
There is no connection to the Favero assioma app
• Enable the Bluetooth connection on your smartphone.
• Make sure that the smartphone is compatible with the Bluetooth v4.0
standard or later versions.
• Disable and again enable the Bluetooth connection on your smartphone.
14 FAVERO Electronics
- 0259-0902A Assioma user manual _Rev21 - EN-IT-DE