Related Manuals for Lippert GS-M120-370-FAB1
Summary of Contents for Lippert GS-M120-370-FAB1
- Page 1 370W RIGID SOLAR PANEL MODEL: GS-M120-370-FAB1 USER MANUAL * Product picture for reference only...
- Page 2 Thank you for purchasing this product. Before operating or installing, please read these instructions carefully. This instruction manual contains information for safe use, installation and maintenance of the product. Please keep this instruction manual in a safe place for future reference. This will ensure safe use and reduce the risk of injury.
-
Page 3: Table Of Contents
CONTENTS CONTENTS ..........................2 EXPLANATION OF SYMBOLS..................3 PURPOSE OF THIS GUIDE ....................3 SAFETY PRECAUTIONS ....................4 General Safety Precautions ........................4 Safety Precautions When Installing a Solar Photovoltaic System ........5 MECHANICAL INSTALLATION ..................5 General Installation Notes ........................5 Selecting the Mounting Location .......................5 Selecting the Proper Mounting Structure and Hardware .............6 Mounting Methods .............................6 Secure the Solar Panel to the RV Roof ...................7... -
Page 4: Explanation Of Symbols
EXPLANATION OF SYMBOLS This manual has safety information and instructions to help eliminate or reduce the risk of accidents and injuries. Always respect the safety warnings identified by the following symbols. The following safety phrases indicate the degree of risk of injury or property damage. -
Page 5: Safety Precautions
SAFETY PRECAUTIONS General Safety Precautions – The installation of solar photovoltaic systems requires specialized skills and knowledge. The installer assumes all risk of injury, including risk of electric shock. Module installation should be performed only by qualified persons. – All modules come with a permanently attached junction box and 14 AWG PV cable terminated in PV connectors. -
Page 6: Safety Precautions When Installing A Solar Photovoltaic System
Safety Precautions When Installing a Solar Photovoltaic System – Solar modules produce electrical energy when exposed to sunlight. – Keep children well away from the system while transporting and installing mechanical and electrical components. – Completely cover all modules with an opaque material during installation to prevent electricity from being generated. -
Page 7: Selecting The Mounting Location
Selecting the Mounting Location – Select a suitable location for the installation of the module. – The module should be installed to reduce the amount of shading. – Modules should be mounted as far away from rooftop obstructions (AC units, plumbing vents, skylights, etc.) as possible. -
Page 8: Secure The Solar Panel To The Rv Roof
frame of the module is generally recommended. – Always observe the instructions and safety precautions included with the module support frames. – Before installing modules on a roof, ensure that the roof construction is suitable. In addition, any roof penetration required to mount the module must be properly sealed to prevent leaks. -
Page 9: Shutting Down The System
C-FSCC60PW-A01/C-FSCC60PW-A02 Temperature Sensor FSEB30JWO-BL Rooftop Solar Electrical Box FBF12A100E LiFePo4 Battery Pack MPPT Solar Charge Controller FSCC30PW-BL Rigid Solar Panel FSCC60PW-BL FSFP37MW-BL Temperature Sensor Fuse C-FSCC60PW-A01 C-FSCC60PW-A02 Battery FBF12A100E Rooftop Solar Electrical Box FSEB30JWO-BL Disconnect Fuse\Breaker Optional System Connection Diagram WARNING: Electrical shock hazard! Do not touch bare conductors or other potentially energized parts. -
Page 10: Maintenance
MAINTENANCE Maintaining Solar Panel To ensure optimum module performance, the following maintenance measures are recommended: – Clean the glass surface of the solar panel when required. Always use clean water and a soft sponge or cloth for cleaning. A mild, non-abrasive cleaning agent may be used to remove stubborn dirt. -
Page 11: Specifications
SPECIFICATIONS This solar modules are made of monocrystalline solar cells in series with high efficiency, high transmission rate, low iron tempered glass, anti-aging EVA, high flame resistant TPT laminate, and anodized aluminum alloy frames. They are designed for easy installation, extended longevity, and resistance to damage incurred by high wind or hail. - Page 12 Any unauthorized use shall void any applicable warranty. The information contained in this manual is subject to change without notice and at the sole discretion of Lippert. Revised editions are available for free download fro lippert.com.
Need help?
Do you have a question about the GS-M120-370-FAB1 and is the answer not in the manual?
Questions and answers