Husqvarna 596542901 Manual page 7

STEP 1
ASSEMBLE THE CANOPY FRAME (FIG. 1-5)
Note: Assemble frame on a clean flat surface next to your riding mower for easy mounting.
PARTS NEEDED
A
x2
B
x2
C
x2
1a
B
C
Attach the Front Side Bar (B) to the Rear
Side Bar (C). Repeat for the second
Front Side Bar (B) and Rear Side Bar (C).
4
A
Attach the remaining End Bar (A)
to the frame assembly.
1b
Make sure the spring button on the
Rear Side Bar [C] clicks into the hole on
the Front Side Bar (B).
5
Completed canopy frame.
2
A
C
Attach the End Bar (A) to the completed
side bars from step 1, (B+C).
7
TOOLS NEEDED
NONE
3
A
B
B
C
Attach the End Bar (A) to the second
completed side bar from step 1, (B+C).
Important, ensure that the Front
Side Bars (B) connect to the same
End Bar (A).