2.
In the Firmware Version section, you should see the latest application versions listed
as 1.0.1 x. In the Operating System section, you should see the latest OS version.
3.
If you notice any communication issues, and the upgrades are complete, typically this
means there is more than one panel set up as a primary on the active loop. from the
cycle power on all the panels on the loop.
4.
After upgrading a MPA1 panel, you must clear your browser's cache. See
Cache and Cookies in the Internet Browsers Used by the MPA1 Web Server
Document 800-26311_ A - February 2020
| 103
Clearing the
for details.