Removing The System Board - Dell Precision M60 Service Manual

Back to Contents Page
System Board
Dell Precision™ M60 Service Manual

Removing the System Board

CAUTION:
NOTICE:
as the back panel) on the computer.
The system board's BIOS chip contains the Service Tag sequence, which is also visible on a barcode label on the bottom of the computer. The replacement kit
for the system board includes a CD that provides a utility for transferring the Service Tag sequence to the replacement system board.
NOTICE:
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the
4. Remove the
5. Remove the
6. Remove the
7. Remove the microprocessor.
8. Remove the two M2.5 x 6-mm screws from the system board support.
1 M2.5 x 6-mm screws (2)
2 system board support
9. Disconnect the speaker cable.
10. Remove the three M2.5 x 4-mm screws.
Great user manuals database on
Before performing the following procedures, read the safety instructions in your System Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
"Preparing to Work Inside the
display assembly.
palm rest.
video card.
microprocessor thermal-cooling assembly.
UserManuals.info
Computer."