Display Assembly - Dell Precision M70 Service Manual

Back to Contents Page
Display Assembly
Dell Precision™ M70 Service Manual
Display Assembly
Display Bezel
Display Panel
Display Assembly
CAUTION:
NOTICE:
as the back panel) on the computer.
NOTICE:
1. Follow the instructions in
2. Turn the computer over and remove the two M2.5 x 8-mm screws labeled "D" on the bottom of the computer.
3. Turn over the computer and open the display.
4. Remove the
5. Disconnect the display cable using the pull-tab, and release the cable from the cable-routing guides.
6. Remove the antenna cable connector from its pocket on the computer base, and then gently disconnect the connector.
7. Lift the display straight up out of the computer base.
Great user manuals database on
Before performing the following procedures, read the safety instructions in your Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
You must remove the display assembly before you remove the palm rest.
"Preparing to Work Inside the
center control cover.
UserManuals.info
Computer."