Samsung HG32ED690DBXEN Installation Manual page 29

Hotel TV Function
Category Item
Widget Mode
Solution Type
Server URL Setting
License Server IP
Setting
Widget
IPTV Mode
Solution
Virtual Standby
Instant On
Room Num Setting
Self Diagnosis
for TV
Self Diagnosis for HTV
SERVICE
SW Upgrade
Service Pattern
Sound Bar Out
TV Reset
28
English
initial value
ON Widget Mode ON/OFF.
Vendor
Select type of solution (Vender Server/ SINC Server).
Server
Set server URL.
Set server IP.
ON IPTV mode On/Off.
Virtual Standby mode On/Off.
OFF
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W (Depending
on the size of the TV screen).
OFF Setup booting mode.
Set Room Number.
Enter Self Diagnosis Menu.
• Picture Test: Use to check for picture problems. If the problem appears in the test
picture, select Yes and follow the directions on the screen.
• Sound Test: Use the built-in melody sound to check for sound problems. If the
problem occurs during the test, select Yes and follow the directions on the screen.
HD Function Check Menu On Executing Item Below OSD is displayed ProIdiom DTV
Channel Key Loss : Ok/Failure (Hotel US) STB SI Vendor
Setting : SI Name Ok/Failure
Bathroom AMP : Ok/Failure (Hotel EU)
RTC : Ok/Failure (Hotel EU)
PC Audio Test : Ok/Failure
PC Self Test : Ok/Failure
SW USB Update function
OFF Same function with SVC Service Pattern
ON: TV speaker sound will be mute. Sound will come out through HDMI.
OFF You must connect the Sound Bar to hear the sound.
OFF: Sound will come out through TV speakers normally.
Returns all settings on the TV to their factory defaults.
Description