Content Index 1. General Safety Instructions ..................3 1.1 SAFETY: General Safety ..................3 1.2 SAFETY: General Power Safety ................5 2. Exploded view diagram with list of items ..............6 3. Wiring connectivity diagram ..................8 4. How to connect and disconnect power cable/ connectivity cable......9 5.
IMPORTANT NOTICE FOR USE IN HEALTHCARE ENVIRONMENTS: Dell products are not medical devices and are not listed under UL or IEC 60601 (or equivalent). As a result, they must not be used within 6 feet of a patient or in a manner that directly or indirectly contacts a patient 1.1 SAFETY: General Safety...
Page 4
if all cables have been disconnected. Do not spill food or liquids on your equipment. Before you clean your equipment, disconnect it from the electrical outlet. Clean your device with a soft cloth dampened with water. Do not use liquids or aerosol cleaners, which may contain flammable substances.
Be sure to grasp the plug, not the cable, when disconnecting equipment from an electric socket. If your equipment uses an AC adapter: Use only the Dell provided AC adapter approved for use with this device. Use of another AC adapter may cause a fire or explosion.
Page 8
○ ○ ○ Description Q’ty Remark BEZEL KEY BOARD KEY POWER KEY FUNCTION DELL LOGO SPONGE PANEL MYLAR POWER BOARD MAIN BOARD For EMEA Only, MAINFRAME not for STAND BUTTON other regions VESA-BRACKET REAR COVER PLATE DELL LOGO COVER VESA HINGE ASS’Y...
Page 9
See “NOTE" NOTE: For replacement of power cord, connectivity cable and external power supply (if applicable), contact Dell: 1. Go to https://www.dell.com/support. 2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom-right corner of the page.
4. How to connect and disconnect power cable/ connectivity cable...
Page 12
NOTE: This “Disassembly and Assembly Procedures” is for EMEA only, not for other regions. Please note that Dell will deem warranty void if any disassembly is done on the monitors. Tools Required List the type and size of the tools that would typically can be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
Page 13
5.1Disassembly Procedures Step Figure Remark Pull up the stand ass’y Remove Stand ass’y Remove the 6 pcs Remove the rear cover screws .
Page 14
Use scraper to insert from the bottom site and then open the rear cover Remove the tapes Remove the mainframe Disconnect the cables and remove the 2 pcs screws on the site of the mainframe and 2 pcs of hexagon screws Remove maylar...
Page 15
Remove the screws on the mainboard and power board Remove the powerbard and mainboard Mainboard and powerboard...
Page 16
5.2 Assembly Procedures Tighten the screws on Assemble the boards powerbard mainboard Assemble maylar connect the cables and tighten the 2 pcs screws on the site of the mainframe and 2 pcs of hexagon screws assemble the Re-stick the tapes mainframe...
Page 17
Assemble the rear tighten the 6 pcs screws . cover Pull in the stand ass’y Assemble the stand ass’y...