Tools for assembly
You require the following tools for the
assembly:
¡ Spirit level
¡ Wrench, WAF 13
¡ Wrench, WAF 17
¡ Forstner 35 mm drill bit
¡ 2 mm twist drill
¡ Screwdriver
Installing the appliance
Preparing the appliance
To make it easier to slide in the
1.
appliance, turn in the appliance's
rear feet until the appliance is on
the runners.
Measure the built-in niche.
2.
Installation and connection en
Lay the power cord as well as the
3.
water inlet and water drain hose.
Slide the appliance in and, at the
4.
same time, pull through the power
cord, water inlet and water drain
hose.
Connect the water inlet hose. Con-
5.
necting the water inlet hose
Connect the water drain hose.
6.
→ "Water outlet connection types",
Page 22
Unscrew the rear appliance feet.
7.
17