Samsung RT18M6213WW Installation Manual page 6

Installation
To install the ice maker kit
WARNING
Refrigerator must be disconnected from the source of electrical supply before attempting
the installation.
6 English
Untitled-1 6
1. Remove the screws tightening the water
inlet cover (A) located on the top of the
refrigerator. Then, slide out the water
inlet cover (A) to remove.
- After removing the water inlet cover
A
A
2. Remove the pipe plug foam (A) from the
pipe.
A
3. Slide the flexible tube (A) towards the
water inlet tube (B) (with a white water
line) and secure it to the water inlet tube
(B).
NOTE
B
Do not remove the cap plugged in at the
A
end of the white water line.
(A), remove the aluminum seal.
2021-09-06 10:47:00