Table of Contents
Advertisement
Transferring pictures from the internal card reader
1 Make sure Kodak EasyShare software is installed (see
dock is connected to your computer (see
2 Open the accessory door on the printer dock.
3 If a digital camera is docked, remove it.
IMPORTANT: Insert the card only as shown. Do not force the card into the card slot.
Notched corner
■
To remove the card, push it in, then release it. When the card is partially ejected,
pull it out.
www.kodak.com/go/support
Using your printer dock with a computer
page
4 Orient the SD/MMC card as shown, then push the
card into the card slot to seat the connector.
5 Press the Transfer button,
Kodak EasyShare software opens on your computer (if
it is installed).
The printer dock Transfer light blinks while the pictures
are being transferred. The Transfer light continues to
blink until the Transfer or Print button is pressed, or
until the connection is no longer available.
IMPORTANT: Do not insert or remove a card when the
printer dock is transferring pictures or if the
card slot light is blinking.
■
To stop transfer, or to return the printer dock to
ready status after transferring pictures, press
the Cancel button,
page
22) and the printer
24).
, on the printer dock.
.
28
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EasyShare Printer Dock Plus Series 3 and is the answer not in the manual?
Questions and answers
hello when I plug the device in the lights come on but shuts off right away. I try pressing the buttons. My question is will it need to be fixed or is there a way to fix it