Table of Contents
Advertisement
SAFETY PRECAUTIONS
To prevent any possible injury to
persons or damage to property, be
sure to follow the basic safety
precautions, including the following:
Power Plug, Power Cord
■ The degree of injury or
damage resulting from
incorrect use or operation
while ignoring the
indicated matters is
classified and explained
with the following symbols.
WARNING
Indicates a potentially
hazardous situation
which, if not avoided,
could result in
serious injuries or
even death.
CAUTION
Indicates a potentially
hazardous situation
which, if not avoided,
could result in injury
to persons or damage
to property.
■ The precautions to be
observed are indicated
with the following symbols
and signs.
This symbol
indicates a
prohibited
action.
This symbol
indicates a
mandatory
action.
E - 4
WARNING
To prevent fire, electric shock or injury
● Do not damage the power cord.
● Do not process, forcibly bend, pull by force,
twist or bind the power cord.
● Do not place heavy objects on the power
cord, or apply too much force to it.
● Do not damage the power cord while moving
the unit on its casters.
(Otherwise, fire or electric shock may be
caused.)
● Do not plug/unplug the power cord with wet
hands.
(Otherwise, electric shock may be caused.)
● Do not connect the unit from extension cord
or multiple wiring with other electronic
appliances.
(Otherwise, electric shock, fire or heat may be
caused.)
● Do not use other than the rated voltage
220-240V (50Hz).
● Do not operate or stop the unit by using the
power plug.
(Otherwise, electric shock or fire may be
caused.)
● Make sure there is no dust on the power plug
and insert it into the outlet completely.
Any dust around the power plug should be
wiped off with a dry cloth periodically.
(Accumulated dust may result in poor insulation
from humidity, etc., thereby causing fire or
electric shock.)
During Usage
● If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
● The appliance shall be installed in accordance with national wiring
regulations.
● Do not put fingers or foreign objects (pin, needle, stick, etc.) into the air
outlet or air intake.
(The fan is rotating at high speed inside. Injury, electric shock and malfunction
may occur.)
● Do not make modifications. Disassembly, repairing, modifications shall
not be made by a person other than the service engineer.
(Otherwise, fire, electric shock or injury may be caused.)
● Do not place spray cans close to the main unit. Do not use flammable
hazardous materials (gasoline, thinner, etc.) near the main unit.
(Otherwise, ignition of fire, explosion may occur.)
● Do not directly apply air to human bodies for a long period of time.
(Otherwise, sickness or health problem may occur.)
● Do not place the unit near heating appliances.
(Otherwise, plastic parts will melt and fire ignition may occur.)
In Case Of An Exception (e.g., burnt smell)
● Be sure to immediately shut down the product, remove its power plug and
contact the customer service center for repair.
(Otherwise, electric shock or fire may be caused.)
● For repairs, please consult the store where you purchased the product or
the nearest customer service center.
(An incomplete repair may cause electric shock, fire or injury.)
Before Maintenance
● Be sure to shut the unit down and remove its power plug.
(The inner fan is rotating at high speed and may cause injury.)
E - 5
Advertisement
Table of Contents
