Recording Data - Nikon NPL-302 Series Instruction Manual

10 Error Messages

Recording Data

DATA FULL
The data storage is full.
Press any key to return to the Basic Measurement Screen (BMS). Then:
To ...
delete unnecessary data
delete jobs
DUPLICATE PT
The input PT you are trying to record already exists in the current job. An existing
coordinate record cannot be overwritten by measured data.
Press any key to return to the point input screen. Change PT.
Duplicate PT
The input PT you are trying to record already exists in the current job as an SS, SO,
or CP record. An existing SS, SO, or CP record can be overwritten by measured
data.
To ...
return to the PT input screen
record RAW data and update XYZ data
record RAW data only
No Open Job
No job is open.
To ...
open the job list, if there are existing jobs
create a new job
return to the previous screen
210 Pulse Laser Station NPL-302 Series Instruction Manual
Go to ...
MENU > Data
MENU > Job
Press ...
Abrt
[ESC] or the
XYZ
the softkey
RAW
the softkey
Press ...
[1] or select
Create job
[2] or select
[ESC]
softkey
Select job
10.8
108.1
108.2
108.3
108.4