Summary of Contents for Yada Power Bank Pro
- Page 1 POWER BANK PRO WP ITM. AC532791 User Manual IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY...
-
Page 2: Technical Specifications
TECHNICAL SPECIFICATIONS: Product Dimensions: 6.66 x 3.39 x 1.3 in (169 x 86.1 x 33 mm) Product Weight: 1.02lbs (463g) Internal Battery: Lithium-Ion Battery Capacity: 37 Wh Input (Micro USB): 5V 2A Input (USB-C): 5V 3A / 9V 3A / 12V 3A / 15V 3A / 20V 3A USB-A Output: 5V 2.4A / 9V 2A / 12V 1.5A USB-C Output:... -
Page 3: Battery Disposal
WARNING: INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS • Always wear safety glasses when jump starting a battery (to protect your eyes), and gloves when handling a battery (to protect your hands). • When jump starting a vehicle please ensure that the gray plug is securely fitted into the jump starter socket on the jump starter. -
Page 4: Important Safety Instructions
WARNING CONT.: IMPORTANT SAFETY INSTRUCTIONS WARNING - When using this product, basic precautions should always be followed, including the following: a) Read all the instructions before using the product. b) To reduce the risk of injury, close supervision is necessary when the product is used near children. - Page 5 WARNING CONT.: 3) Wear complete eye protection and clothing protection. Avoid touching eyes while working with battery. 4) If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately flood eye with running cold water for at least 10 minutes and get medical attention immediately.
-
Page 6: Package Contents
PACKAGE CONTENTS: Jump Starter Micro USB Power Bank Charging Cable Safe & Smart Jumper Cables CHECKING THE POWER LEVEL: Press the power button to check the capacity of the Jump Starter. Indicator Lights: 1 Flashing 1 Solid 2 Solid 3 Solid 4 Solid Battery Capacity: Below 5% 5-25%... -
Page 7: Charging Your Mobile Devices
CHARGING YOUR MOBILE DEVICES: We recommend using the original charging cable that came with your mobile device, or an approved cable certified by the mobile device manufacturer. Three mobile devices can be charged at the same time by utilizing USB-A, USB-C Output ports &... - Page 8 CHARGING THE JUMP STARTER: At home: Micro USB Cable 1. Plug included Micro USB Charging Cable into a USB-A port on a 2A USB wall adapter (not included). 2. Connect the Micro USB Charging Cable into the Micro USB Charge Input Port on the Jump Starter.
-
Page 9: Jump Starting
JUMP STARTING: BEFORE YOU JUMP START! Before you attempt to jump start your vehicle, ensure your vehicle is in Park. Unplug all USB charging cables. Ensure manual transmission vehicles are in Neutral with the Emergency Brake engaged. Black The Cable Clamps are color-coded, POSITIVE (+) and BLACK for NEGATIVE (-). - Page 10 JUMP STARTING CONT.: Connect the clamp to the POSITIVE (+) post on the car battery. The POSITIVE battery post will be slightly larger than the NEGATIVE post, and will be marked with a PLUS (+) sign. There may also be a plastic protective cover over the positive battery post.
- Page 11 JUMP STARTING CONT.: NOTE: If vehicle does not crank, or cranks very slowly, wiggle the cable clamps on the vehicle battery to ensure they are making good contact. Wait 60 seconds before trying to jump start your vehicle again. Each new jump start attempt requires disconnection of both clamps from the car battery and reconnection.
- Page 12 This status shows after 90 seconds time out. Disconnect the jumper cables from the car battery and Jump Starter to reset. Reconnect the jumper cables to jump start the vehicle. None Please contact YADA for troubleshooting Solid LED On Flashing LED LED Off FLASHLIGHT:...
-
Page 13: Limited Warranty
WARRANTY: YADA LIMITED WARRANTY YADA warrants, to the original purchaser, that its products are free from defects in material and workmanship for 1 year from the date of original purchase. Where permitted by law, YADA’s liability shall be limited to that set forth in this limited express warranty. This limited express... -
Page 14: Owner's Responsibilities
If at that time it is determined that a replacement unit is needed, the support representative will issue a Return Authorization and instruct on how to get a new unit. YADA makes no other warranty of any kind aside from the limited express warranty stated herein. - Page 15 WARRANTY CONT.: FCC Compliance Statement: Jump Starter & Power Bank Model: AC532791 Responsible Party: ADC Solutions Auto, LLC 2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626 Tel: 1-866-294-9244 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that...
-
Page 16: Troubleshooting
TROUBLESHOOTING: Issue Cause Remedy Cannot jump start Wrong clamp Make sure to clamp the jumper connection cable to the POSITIVE (+) post on the car battery. And BLACK jumper cable to NEGATIVE (-) post or car interior. Refer to Page 10 for details. 90-Second timer Jump Starter timed out.
Need help?
Do you have a question about the Power Bank Pro and is the answer not in the manual?
Questions and answers
Well this probably sounds silly, but I've looked everywhere through the manual and online on how to turn off my yada power bank pro and I cannot find it. I read that some power banks shut off automatically after some time, but with this one it seems to be draining the battery while I'm not even using it at all. So if there is anything you could provide me to help I would greatly appreciate it!
The Yada Power Bank Pro powers off automatically 30 seconds after unplugging the gray end of the jumper cables from the jump starter.
This answer is automatically generated