Supported Peripherals - Xilinx Kria KV260 User Manual

3. For any applications installed on the local file system via the DNF install, the platform can
now dynamically load and swap those applications. To see a list of the applications local to
the system, execute sudo xmutil listapps. You can also see what applications are local
by manually exploring the /opt/xilinx directory.
4. By default, kv260-dp is loaded on boot. From the applications list, check for an active
application loaded (active = 1 in the xmutil listapps output). If there is a loaded
application, unload it by running the sudo xmutil unloadapp command to unload the
current application before proceeding to the next step.
5. From the application list, start the new application by running sudo xmutil loadapp
application_name. The platform configuration is automatically handled and starts the
application.
6. Applications with a Jupyter-based cockpit will start-up automatically. You need to point your
web-browser to the associated IP address and port. The associated IP address and port
information is printed to the UART at boot. To query your Jupyter lab server URL after the
initial boot, run: sudo jupyter notebook list.

Supported Peripherals

The following table outlines external peripherals that are tested with the corresponding
accelerated applications. It is recommended that you use a peripheral from the list to ensure that
you realize maximum platform performance.
Table 6: Accelerated Application Peripherals
Accelerated Application
Smart camera
Smart camera
Smart camera
AI-Box-ReID
The following table outlines external peripherals that are functionally verified with the KV260
Starter Kit.
Table 7: KV260 Starter Kit Functionally Tested Peripherals
IAS camera sensor ISP interface (J7)
IAS camera sensor ISP interface (J7)
IAS camera sensor direct interface (J8)
RPi camera interface (J9)
UG1089 (v1.2) July 26, 2022
KV260 Starter Kit
Peripheral
IAS camera sensor ISP interface (J7)
USB camera
Audio Codec I2S PMOD (J2)
IP camera
Peripheral
Chapter 4: Software Getting Started
Part Number
OnSemi AR1335 sensor module. Avnet part
number: CAVBA-000A
Logitech BRIO
Digilent PMOD SKU 410-379
Amcrest IP8M-2493EW
Part Number
OnSemi AR0144
OnSemi AR1335
OnSemi AR1335
Raspberry Pi camera module v2
Send Feedback
www.xilinx.com
16