Integrated Collection Container - Lambrecht rain[e]observer Operating Instructions Manual

Operating Instructions
rain[e]observer Precipitation Measuring System

9.4.3 Integrated collection container

Illustrations using the rain[e]
Inner protective cylinder
12 rain[e]observer
Clamping plug for
the heating
Operating Instructions
• Open the device
◦ Unscrew the knurled screw on the
underside.
◦ Grasp the upper edge of the funnel and
the mast shaft and turn the upper section
counterclockwise (open).
◦ Carefully lift off the housing - pay attention
to the connector for the heating.
The housing upper section's
measuring edge is very sharp.
There is a risk of cuts.
It is recommended that you do not
press on the measuring edge and/or
wear gloves.
• Remove the clamping plug.
• Set the housing aside.
• Lift off the inner protective cylinder.