Advertisement
Quick Links
Oil Cooler Kit
Greensmaster
Model No. 117-9314
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
© 2011—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
3400 Series Traction Unit
Description
No parts required
Oil cooler
Hydraulic hose assembly
Cooler hose
Temperature sender
Adapter
90-degree elbow fitting
Sealing grommet
Bushing
Double R-clamp
Clip
Cooler tab
Upper cooler bracket
Lower cooler bracket
Shoulder bolt
Hex-head screw (1/4 x 5/8 inch)
Spring washer
Flange nut (3/8 inch)
Hose clamp
Cable tie
Register at www.Toro.com.
Form No. 3369-722 Rev A
Installation Instructions
Qty.
–
Drain the hydraulic oil tank.
1
1
1
1
1
1
1
1
1
5
Install the fittings and route the hoses.
2
2
2
2
9
2
2
4
2
Use
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Advertisement
Related Manuals for Toro 117-9314
Summary of Contents for Toro 117-9314
- Page 1 Form No. 3369-722 Rev A Oil Cooler Kit Greensmaster ® 3400 Series Traction Unit Model No. 117-9314 Installation Instructions Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. – No parts required Drain the hydraulic oil tank.
- Page 2 Draining the Hydraulic Oil Installing the Kit Tank Parts needed for this procedure: No Parts Required Oil cooler Hydraulic hose assembly Procedure Cooler hose WARNING Temperature sender Hydraulic fluid escaping under pressure can Adapter penetrate skin and cause injury. 90-degree elbow fitting •...
- Page 3 14 15 G016963 Figure 2 1. Hydraulic oil tank 11. Hydraulic hose end and fitting (attached) 21. Cooler cover 2. Fan mount 12. Bushing 22. Flange nut (3/8 inch) 3. Radiator 13. 90-degree elbow fitting 23. Upper cooler bracket (2) 4.
- Page 4 Maintenance 13. Secure the 90-degree fitting that is on the end of the hydraulic hose with a hose clamp (Figure 2). Clean the system every year (clean the screens), or more 14. Attach the adapter fitting to the 90-degree fitting often, if necessary.