4Hd-Hub Label Description; Connections - QubicaAMF 400288005 Installation Manual

BES X installation manual

1.1.4 4HD-HUB label description

1
2
3
The image above shows the label located on the side of the 4HD-HUB unit.
1. Manufacturer (QubicaAMF Europe S.p.A.);
2. Part number (P/N: 288250021 or 288250018 or 288250014);
3. List of certifications (CE certification);
4. Name of the unit (4HD-HUB Rev.3 or 4HD-HUB Rev.2 or 4HD-HUB);
5. Electrical notes (100-240 V; 1.3-0.6 A; 50/60 Hz);
6. Serial number with bar code.

1.1.5 Connections

Power specifications for the 4HD/5HD-HUB are: 100-240 V; 1.3-0.6 A; 50/60 Hz.
On the 4HD/5HD-HUB the following connections are available:
Connectors on the front side of the 4HD/5HD-HUB unit:
•
L1 CPU COM line: Network connection with POE for the 4HD/5HD-CPU.
•
L2 Powered COM line: Currently not used.
•
L3 ODD console COM line: Network connection with POE for the odd lane console (EasyKey or
SuperTouch models only). When a single console per pair of lanes is installed, this output is not used.
•
L4 EVEN/SINGLE console COM line: Network connection with POE for the even lane console (EasyKey
or SuperTouch models only). This output is always used when the console is installed, even in the
case of a single console per pair of lanes.
•
PRESENT ONLY ON THE 4HD-HUB: P1 LCD console backlight: Power out for SuperTouch console
backlights NOT used with SuperTouch Ver.2 consoles (P/N: 288150026).
•
PRESENT ONLY ON THE 4HD-HUB Rev.1 and 4HD-HUB Rev.2: D1 Console Data ODD: For OLD
consoles only. Power supply, XCOM and input / output audio channels for the odd lane console
(Micro I, Micro II or Fly console models only). When a single console per pair of lanes is installed, this
output is not used.
•
PRESENT ONLY ON THE 4HD-HUB Rev.1 and 4HD-HUB Rev.2: D2 Console Data EVEN / SINGLE: For
OLD consoles only. Power supply, XCOM and input / output audio channels for the even lane console
(Micro I, Micro II or Fly console models only). This output is always used when the console must be
installed, even in the case of a single console per pair of lanes.
•
PRESENT ONLY ON THE 5HD-HUB: D1 Pinspotter COM line: Connection to TMS and EDGE string
pinspotter chassis.
•
PRESENT ONLY ON THE 5HD-HUB: D2 YCOM COM line:
o On the 288250025: Connection for Control I/O 3 ONLY.
o On the 288250025-01 and 288250025-02: Connection for Control I/O 3 OR the "5HD-HUB to
first generation SuperTouch – cable adapter" (P/N: 288401054).
Connectors on the upper side of the 4HD/5HD-HUB unit:
P/N :400288005; Rev: L, 09/21
System components
4
5
6
3