Advertisement
Advertisement
Table of Contents
Related Manuals for Kicker KX350.4
Summary of Contents for Kicker KX350.4
- Page 2 Amplifier Serial Number: KX350.4 / KX650.4 / KX850.4 You have just purchased the latest in amplifier technology to carry the famous KICKER name. Your KICKER KX series amplifier is designed and built to give you years of powerful and trouble-free performance. This installation...
- Page 3 EndKaps Cast aluminum, custom, removable covers to protect and hide all your wiring connections to the amplifier. Can be prepped and painted any custom color you choose. Two Year Warranty When purchased from an Authorized KICKER dealer. KX Amplifiers...
- Page 4 Mounting When selecting a location to mount your Kicker amplifier be sure it is structurally sound and that there are no items behind the area that could be damaged by the screws. Check for brake lines, fuel lines, gas tanks, or wiring harnesses etc.
-
Page 5: Wiring
When working with power connections it is always recommended that you disconnect the battery to prevent accidents. Note: To get the best performance from your new Kicker Amplifier, we recommend using genuine Kicker Accessories and Wiring. The ground should be connected to the amplifier first before making any of the other connections. - Page 6 RCA Dummy Plugs When using both sets of High Level inputs, RCA dummy plugs must be inserted into the AMP 2 inputs in order for the fader to work properly. If the amplifier is being used in any other configuration do not use the RCA dummy plugs! If you do not have dummy plugs available, simply using raw RCA ends or cutting the ends off of existing cables will be sufficient.
-
Page 7: System Diagram
System Diagram The following diagrams show the most common configurations for your system. STEREO FOUR CHANNEL OPERATION KX.4 amplifiers are capable of operating into a minimum impedance of 2 ohms per channel in stereo operation. GROUND GROUND REMOTE REMOTE TURN-ON TURN-ON 18"... -
Page 8: Bass Boost
Navigation On your Kicker amplifier there are six rotary controls on top and two switches on the end panel. These controls ensure the reliability and performance of the amplifier, so they need to be set correctly. CROSSOVER SWITCHES NEVER CHANGE THE CROSSOVER SWITCH SETTING WITH... - Page 9 Remote Bass Level When using AMP 2 as a subwoofer amplifier you have the ability to control the level of the subs from the driver’s seat. To mount the controller simply screw the metal bracket to the chosen location, then slide the housing onto the bracket until it snaps into place.
-
Page 10: Specifications Common To All Models
22 1/2” 25 3/4” (40.64cm) (57.15cm) (65.40cm) KX Amplifiers Model KX350.4 60 x 4 @ 4 ohms, 14.4Vdc, 1% THD, CEA-2006 (Watts) Signal to Noise Ratio -98 CEA-2006 (ref: 1W, A-weighted) Model KX650.4 120 x 4 @ 4 ohms, 14.4Vdc, 1% THD,... -
Page 11: Troubleshooting
There are two LEDs on the end panel of your Kicker KX series amplifier, one green and one red. When the green LED is lit this indicates the amplifier is turned on and no trouble exists. If the green LED turns off and the red LED is lit this indicates that the protection circuitry (SORT) is engaged. - Page 12 NOTE: All specifications and performance figures are subject to change. Please visit the support section at www.kicker.com for the most current information. Please Note: Modern high performance speakers have a lower DC Resistance than what used to be available.
- Page 13 ELECTRONICS LIMITED WARRANTY Kicker warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) MONTHS from date of original purchase with receipt. When purchased from a Authorized KICKER Dealer it is warranted for TWO (2) YEARS from date of original purchase with receipt.
- Page 14 Notes KX Amplifiers...
- Page 15 Pizza Delivery # KX Amplifiers...
Need help?
Do you have a question about the KX350.4 and is the answer not in the manual?
Questions and answers