Page 2
Thank You! Thank you for making BLUETTI a part of your family. From the very beginning, BLUETTI has tried to stay true to a sustainable future through green energy storage solutions for both indoor and outdoor use while delivering an exceptional eco-friendly experience for our homes and our world.
• BLUETTI recommends that you use genuine accessories from BLUETTI. • BLUETTI shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the BLUETTI. • For your safety and benefit, please read carefully before using and keep it handy for future reference.
Safety Instructions General Safety BLUETTI products are developed to be safe and reliable. Please read this guide for important safety information about your device. The guide is intended to help you be more comfortable and productive while using this device. Failure to follow these guidelines for proper set up, use, and care for your device may cause damage to this unit and injury to yourself or others.
Maintenance • When not using the unit for extended periods of time, power it off and remove all electrical connections. • Charge the unit to 80% SOC every 3 months for best battery life. • Clean the unit with a dry cloth gently and carefully. Handling and Storage •...
What’s In The Box Standard Packaging Portable Power Station AC Adapter Solar Charging Cable User Manual V2.0 Car Charging Cable Multifunctional DC User Manual Charging Cable * Below accessories are not included in standard packaging and can be purchased separately at https://www.bluettipower.com/. 12V/25A RV Cable Lead-acid Battery DC7909 F-XT90 Cable...
Page 8
* AC Adapter: 59.1in/150cm. Solar Charging Cable: 19.7in/50cm. MC4-XT90. Car Charging Cable: 19.7in/50cm. Cigarette Lighter Port-XT90. Multifunctional DC Charging Cable: 39.4in/100cm. XT90-Aviation 12V/25A RV Cable: Aviation-XT60, 59.1in/150cm; XT60-SPC45, 19.7in/50cm. Lead-acid Battery Charging Cable: 19.7in/50cm. XT90-Clamp. DC7909 F-XT90 Cable: 5.5in/14cm. Note: All measurements are for reference only. Package details are subject to change without prior notice.
Product Overview Diagram Power Button Wireless Charging Pad Cigarette Lighter Port LCD Screen 12V/25A RV Port AC Output 12V/3A DC Port USB-A Port PV/Car Input USB-C Port Adapter Input JUST POWER ON...
Specifications AC200P General Battery Capacity 2000Wh/40Ah Cell Type LiFePO4 Dimensions (L*W*H) 16.5*11*15.2in/420*280*386mm Weight 60.6lbs/27.5Kg Discharging Temperature -4°F-113°F/-20°C-45°C Charging Temperature 32°F-113°F/0°C-45°C Storage Temperature 32°F-113°F/0°C-45°C Working Humidity 10%-90% AC Output Power 2000W Surge Power 4800W Voltage 100V-120VAC Frequency 50Hz-60Hz <1500W, 45dB Max.
Page 11
8.2A Max. Note: When connected with solar panels, AC200P turns on automatically whenever there is sunlight. AC200P supports pass-through charging but doesn’t support UPS function. When the battery level drops to 5%, charge AC200P to extend battery lifespan. JUST POWER ON...
Operation Powering On/Off Startup and shutdown: Press the power button to start up this unit and hold for 2s to shut down. AC/DC Output: Tap the ‘AC ON/OFF’ or ‘DC ON/OFF’ on the screen to enable and disable. Symptom LED Indicator Start up Shut down BMS Over-current/Short-circuit Protection...
Page 13
Settings This section provides general setting configurations, including AC output, DC input, ECO Mode*, language, buzzer, and system date/time. BACK BACK BACK BACK English 100V 120V AC Output Voltage 日本語 English English English Language Setting English 日本語 日本語 50Hz 60Hz AC Output Frequency English Buzzer Setting...
Charging Adapter Charging Plug the AC200P into a standard wall outlet, and press the power button to start charging. PV Charging Connect the solar panels (in series or parallel) to AC200P via the multifunctional DC charging cable and solar charging cable.
Page 15
700W solar input. In other words, if you’re using solar panels with a total power of 800W to charge AC200P, the extra 100W will not be needed for charging but squander away directly. ii)Do not use solar panels with an open circuit voltage of over 150V, as this may cause damage to AC200P.
(black) to the other. Note: Set the ‘Car’ as DC input source to enable lead-acid battery charging. If charging AC200P with a 12V lead-acid battery, make sure it discharges at above 11.5V. If it’s a 24V lead-acid battery, the discharge voltage should be higher than 23V.
A: DoD indicates the fraction of power that can be withdrawn from the battery. The BLUETTI AC200P sets the DoD to 90%, which means that 90% of the capacity is available to power your device, while the reserved is used to protect the battery from over-discharging.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Technical Support Should you require any further assistance, please do not hesitate to contact BLUETTI Customer Service. JUST POWER ON...
Page 19
For more information, please visit: @ BLUETTI Support @ BLUETTI Official @ bluetti_inc @ bluetti.inc @ bluetti_us service@bluetti.com BLUETTI POWER INC Web: https://www.bluettipower.com/ Tel: 833-988-3663 / 702-463-4792 Mail: service@bluettipower.com Add: 6185 S Valley View Blvd Ste D. Las Vegas, NV 89118.
Need help?
Do you have a question about the AC200P and is the answer not in the manual?
Questions and answers