Related Manuals for Eaton XFG1 HD IP
Summary of Contents for Eaton XFG1 HD IP
- Page 1 Oxalis XFG1 HD IP Fixed Optical Camera Technical Manual XFG1 HD IP Fixed Optical Camera...
- Page 2 MODIFY ANY CONTRACT BETWEEN THE PARTIES. In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or other-wise for any special, indirect, incidental or consequential damage or loss whatsoever, including but not...
-
Page 3: Table Of Contents
A EX ANNEX – CONTROLLED ATEX DOCUMENT ..........9 XFG1 HD IP OPtIcal FIXeD camera TMOX001.A September 2021 www.eaton.com... -
Page 4: Introduction
Aggressive substances that the equipment may be exposed to. v. Following installation ensure a copy of this manual is made available to all operating personnel vi. When installing the device, requirements for selection, XFG1 HD IP OPtIcal FIXeD camera TMOX001.A September 2021 www.eaton.com... -
Page 5: General Arrangement
XFG1 HD IP Fixed Optical Camera Station 3.0 GENERAL ARRANGEMENT Fig.1 Tilt / Swivel bracket XFG1 HD IP OPtIcal FIXeD camera TMOX001.A September 2021 www.eaton.com... -
Page 6: Electrical Installation
14:2014 and IEC 60079-14:2013. refer to ATEX controlled certified ANNEX to this manual. Due to the large number of possible configurations, this manual only covers the standard installation of the units. XFG1 HD IP OPtIcal FIXeD camera TMOX001.A September 2021 www.eaton.com... -
Page 7: Certification / Labelling & Marking
0.2mm between the faces of the identifi ed. enclosure and cover to ensure 0-ring compression. 3. Ensure that only the correct certifi ed glands are used, and that the assembly is shrouded and correctly earthed XFG1 HD IP OPtIcal FIXeD camera TMOX001.A September 2021 www.eaton.com... -
Page 8: Maintenance
O-ring. • Use only Eaton approved spare parts. Fixings and fastenings should be checked for tightness and integrity as part of the 6 monthly inspection XFG1 HD IP OPtIcal FIXeD camera TMOX001.A September 2021 www.eaton.com... -
Page 9: A Ex Annex - Controlled Atex Document
To prevent the build-up of Electrostatic charge the unit should only be cleaned with a damp cloth. 10. The Sunshield is an integral part of the unit containing the certification label and must not be removed. XFG1 HD IP OPtIcal FIXeD camera TMOX001.A September 2021 www.eaton.com... - Page 10 Photos and pictures also do not warrant a specific layout or functionality. Their use in whatever form is subject to prior approval by Eaton. The same applies to Trademarks (especially Eaton, Moeller, and Cutler-Hammer). The Terms and Conditions of Eaton apply, as Eaton referenced on Eaton Internet pages and Eaton order confirmations.
Need help?
Do you have a question about the XFG1 HD IP and is the answer not in the manual?
Questions and answers