Adding Audio Ip Via App - ABB H82001-W Product Manual

8.1.2

Adding Audio IP via App

Precondition
Audio IP must be powered on.
■
■ Audio IP should not be signed by other "Smart Access Point". If Audio IP has been signed
by other "Smart Access Point", you need to clear the signature, e.g. reset the Audio IP by
pressing and holding the reset button for 3 seconds on the back.
■ Select "Setup Welcome IP" when login into App.
■ A project has been created on the App, this project includes the designated buildings, floors
and rooms.
Please follow the steps below:
[1] Open the App, go to a designated room screen, click
[2] Scan the QR code on the back of Audio IP and then continue from step 4.
[3] Or click "Serial number" and enter the serial number pasted on the back of Audio IP.
Product manual 2TMD042200D0001
Commissioning
.
│17