Entré Did Not Find A Dvd Or Cd Title During Quick Lookup When I Inserted The Disc; How Do I Solve A Problem With The Supplied Remote; The Supplied Remote Is Not Responding; How Do I Solve Problems With The Powertouch Iii - Kenwood Sovereign Entre User Manual

Entré did not find a DVD or CD title during quick lookup
when I inserted the disc.
Manually locate the disc title:
• For music, see"Editing Disc Information" on page 74.
• For movies, see "Editing Disc Information" on page 120
How Do I Solve a Problem with the Supplied
Remote?

The supplied remote is not responding

• Press - 1 at the top of the remote. If you used one of the other control
MR H
buttons to turn on or off other devices (such as your TV), you need to
return the remote to Entré control.
• Replace the batteries with fresh ones and be sure they're loaded correctly.
See "Loading Batteries" on page 10.
• Reset the remote's microprocessor:
1. Press and hold C
2. Release C
LED flashes once after you enter each of the first two digits, then
flashes twice, pauses, and flashes twice again after you enter the third
digit.
• Touch a button on Entré's front panel, then try the button on the remote
again.

How Do I Solve Problems with the PowerTouch III

Controller?

I don't see icons for Entré
You must upgrade your PowerTouch III with the control information for Entré.
Contact Kenwood Customer Service at 1-800-KENWOOD for upgrade infor-
mation.
Complete Guide to Your Entré Entertainment Hub, ver. 2.0
S
ODE ETUP
S and enter the number code 9 8 0. The remote's
ODE ETUP
If you have programmed the remote to control your TV,
cable tuner or satellite tuner, resetting its microprocessor
deletes this programming, and you'll need to re-program it.
See page 13 of How to Connect and Set Up Your Entré for
information about programming the remote.
until the remote's LED blinks twice.
Troubleshooting
151