General Information; Access Codes; Configuration Setting Service - Nokia 7500 Prism Manual

1. General information

Access codes

Security code
The security code (5 to 10 digits) helps to protect your
phone against unauthorized use. The preset code is
12345. You can change the code, and set the phone to
request the code. See "Security," p. 42.
PIN codes
The personal identification number (PIN) code and the
universal personal identification number (UPIN) code (4
to 8 digits) help to protect your SIM card against
unauthorized use. See "Security," p. 42.
The PIN2 code (4 to 8 digits) may be supplied with the SIM
card and is required for some functions.
The module PIN is required to access the information in
the security module. See "Security module," p. 60.
The signing PIN is required for the digital signature. See
"Digital signature," p. 60.
PUK codes
The personal unblocking key (PUK) code and the universal
personal unblocking key (UPUK) code (8 digits) are
required to change a blocked PIN code and UPIN code,
respectively. The PUK2 code (8 digits) is required to
10
change a blocked PIN2 code. If the codes are not supplied
with the SIM card, contact your local service provider for
the codes.
Barring password
The barring password (4 digits) is required when using
the Call barring service. See "Security," p. 42.

Configuration setting service

To use some of the network services, such as mobile
internet services, MMS, Nokia Xpress audio messaging, or
remote internet server synchronization, your device
needs the correct configuration settings. For more
information on availability, contact your service provider
or the nearest authorized Nokia dealer, or visit the
support area on the Nokia website. See "Nokia
support," p. 11.
When you have received the settings as a configuration
message and the settings are not automatically saved and
activated, Configuration settings received
To save the settings, select
enter the PIN code supplied by the service provider.
To discard the received settings, select
Discard.
is displayed.
Show > Save. If required,
Exit or Show
>