Advertisement
Quick Links
QUICK START GUIDE
HOW TO USE
1
Remove Clean Water Tank, twist
off water cap on bottom and add
warm water to the fill line.
4
Plug power cord into electrical outlet. Step on the
Handle Release Pedal to recline the unit into the
cleaning position.
Solution
Water
Fill lines
2
Add Hoover® cleaning solution
to the Solution Fill Line then
replace and tighten the cap.
Recline
On /Off
5
Step on the ON/OFF Pedal to turn ON.
3
Slide the Clean Water Tank
back into the unit.
Advertisement
Related Manuals for Hoover PowerDash Pet Advanced
Summary of Contents for Hoover PowerDash Pet Advanced
- Page 1 QUICK START GUIDE HOW TO USE Solution Water Fill lines Add Hoover® cleaning solution Slide the Clean Water Tank Remove Clean Water Tank, twist to the Solution Fill Line then back into the unit. off water cap on bottom and add replace and tighten the cap.
- Page 2 HOW TO USE (CONT’D) SQUEEZE TRIGGER RELEASE TRIGGER TO WASH TO DRY Slowly push forward then backwards while Release trigger then slowly push forward then squeezing the trigger to apply water and backwards to remove water and dry the carpet. cleaning solution.
Need help?
Do you have a question about the PowerDash Pet Advanced and is the answer not in the manual?
Questions and answers
There is no suction on the vacuum
The Hoover PowerDash Pet Advanced may have no suction because the automatic shut-off engages when the dirty water tank is full. To fix this, turn off the unit, remove and empty the dirty water tank, and check the filter for debris. Also, wipe the rubber seal with a cloth if debris is blocking it.
This answer is automatically generated