Myenergi Hub Setting Up
  1. Manuals
  2. Brands
  3. Myenergi Manuals
  4. Switch
  5. Hub
  6. Setting up

Myenergi Hub Setting Up

Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

Setting up a new
myenergi hub
When you are setting up a new myenergi hub, there are a few steps
that you will need to follow to make sure that everything is up to
date.
1. Make sure that the new hub has the latest firmware installed
before
2. Pair  the new hub with your eddi and/or zappi
Setting up a new myenergi hub
Please follow the instructions below.  If you run into any problems
please contact our technical support team at
support@myenergi.com.au
(1) Plug the hub into the power and
Ethernet
Once the hub is plugged in you should see a green "power" light
and a blue "server" light

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hub and is the answer not in the manual?

Questions and answers

Summary of Contents for Myenergi Hub

  • Page 1 Setting up a new myenergi hub When you are setting up a new myenergi hub, there are a few steps that you will need to follow to make sure that everything is up to date. 1. Make sure that the new hub has the latest firmware installed before 2.
  • Page 2 If you have more than one myenergi device then pair the new hub with the master device. Eddi 1. Plug in the hub into a power source and make sure that the power LED is GREEN 2. Please also connect your Hub directly to your internet router, please check the server LED is illuminated BLUE 3.
  • Page 3 6. Once the update has finished press the menu “X” button until you are back to the main (graphic) screen. 7. The Eddi LED on the hub should now be lit (green or blue) 8. The Eddi and the hub are now paired – setting up a new...
  • Page 4 Zappi v2 1. When setting up a new myenergi hub, plug in the hub and make sure that the power light is green 2. Now put the hub into pairing mode by briefly pressing the “pair” button. The power light on the hub will flash red and the “harvi / •...
  • Page 5 7. The Zappi light on the hub should now be lit (green or blue)   If you have any problems setting up a new myenergi hub then please contact the myenergi technical support at support@myenergi.com.au and we will help you complete the...

Table of Contents

Save PDF