Disassembly & Reassembly - Samsung 1510MP Service Manual

3 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the
MH15NS/MH17NS monitor.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling
these components.
3-1 Disassembly
Cautions : 1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
3. R/Cover opening jig : BH81-00001A
MH15NS/MH17NS
1. Place monitor face down on cushioned table.
Remove 4 screws from grip on the stand and
insert the opening drive into the grooves at
each side and press until it clicks.
2. Remove back cover from the monitor and
remove 2 screws from the main board.
3. Disconnect speaker cable and function cable
from the shield PCB and remove shield PCB.
Disconnect inverter cables, LVDS cable from
the MAIN board.
4. Remove 7 screws from the MAIN board and
remove 7 screws from the cover front.
(MH15NS : Remove 6 screws from the MAIN
board and remove 6 screws from the cover
front.)
5. Remove the cover front and remove 4 screws
from the panel.
3-1