Warranty Description - Prife iTeraCare iTera-Classic DS-313 Instructions Manual

WARRANTY DESCRIPTION:

One year warranty (from Date of Purchase)
1. Defective device e.g. in material and workmanship during the warranty period,
please contact our customer service.
2. The Company also provides repair and maintenance service after the warranty
period where cost will be incurred by the owner.
Warranty will be void under the following conditions:
1. Exceeded waranty period.
2. Damage due to not following the User's manual.
3. Device damage due to mishandling or repair by unauthorize persons.
Environmental Protection device:
This device has Environmental Protection usage for 10 years.
The Environmental Protection assures that the device is Human & Environmental
friendly.
CAUTIONS:
1. Read all instructions carefully before use.
2. This device is not intended to be used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the device by a person responsible for their safety.
3. Handle with care. This device is fitted with a crystal glass tube, please avoid
knocking or dropping the device. Children should be supervised to ensure
that they do not play with the device.
4. Do not use the device outdoors. This device is intended for household use only.
Do not use the device for anything other than its intended use.
5. Do not switch on the device if it appears to be faulty in any way. Please contact
and send to a nearby service centre.
6. Remove all metal accessories before use. Remove contact lenses before
using on the face.
7. Do not blow on specific parts of the body without movement for more than 3
seconds to avoid skin burn.
8. Do not block the air inlet and outlet to prevent overheating.
9. Do not use the device for too long.This device is fitted with an automatic
switch- off thermal link to protect the motor from overheating. The device will
automatcally reconnect after the motor cools down.
10. To protect against electrical shock, do not immerse cord, plugs, device body in
water or other liquids.
11. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons.
12. Never leave the device unattended when it is switched on. Unplug when the
device is not in use.
5