Even Embers GAS2540AS Owner's Manual

Even Embers GAS2540AS Owner's Manual

5 burner gas griddle

Advertisement

5 Burner Gas Griddle
OWNER'S MANUAL
ASSEMBLY AND OPERATING IN STRUC TIONS
SAVE THIS MANUAL FOR FUTURE REFERENCE
Model GAS2540AS
WARNING
NOTICE TO INSTALLER:
HAZARDOUS EXPLOSION MAY RESULT IF THESE
LEAVE THESE INSTRUCTIONS WITH
WARNINGS AND INSTRUCTIONS ARE IGNORED. READ AND
THE GRIDDLE OWNER FOR FUTURE
FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS
MANUAL TO AVOID PERSONAL INJURY, INCLUDING DEATH
REFERENCE .
OR PROPERTY DAMAGE.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GAS2540AS and is the answer not in the manual?

Questions and answers

Summary of Contents for Even Embers GAS2540AS

  • Page 1 5 Burner Gas Griddle OWNER’S MANUAL ASSEMBLY AND OPERATING IN STRUC TIONS SAVE THIS MANUAL FOR FUTURE REFERENCE Model GAS2540AS WARNING NOTICE TO INSTALLER: HAZARDOUS EXPLOSION MAY RESULT IF THESE LEAVE THESE INSTRUCTIONS WITH WARNINGS AND INSTRUCTIONS ARE IGNORED. READ AND...
  • Page 2 IMPORTANT SAFETY WARNINGS WE WANT YOU TO ASSEMBLE AND USE YOUR Griddle AS SAFELY AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDS AS YOU ASSEMBLE AND USE YOUR Griddle. WHEN YOU SEE THE SAFETY ALERT SYMBOL PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND OPERATING YOUR Griddle.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS: General Warnings ..........3-4 LP Gas Cylinder (Tank) Specifi cations and Installation .
  • Page 4: General Warnings

    GENERAL WARNINGS: WARNING • Leak test all connections before fi rst use, even if griddle was purchased fully assembled and after each tank refi ll. Check the propane tank rubber seal for damage. • Always check the unit and propane tank prior to each use as indicated in the “Checking for Leaks” & “Pre-Start Check List”...
  • Page 5: Lp Gas Cylinder (Tank) Specifications And Installation

    • Griddle is hot when in use. To avoid burns: • DO NOT attempt to move the griddle. • Block the wheels so the unit does not accidentally move. • Wear protective gloves or oven mitts. • DO NOT touch any hot griddle surfaces. •...
  • Page 6 LP GAS CYLINDER (TANK) SPECIFICATIONS: LP gas cylinder (not supplied with this griddle) The LP (Liquid Propane) gas cylinder specifi cally designed to be used with this griddle must be 12” (30.5 cm) diameter x 18” (45.7 cm) tall and have a 20 lb. (9.1 kg) capacity incorporating a Type 1 cylinder valve and an over-fi lling protection device (OPD).
  • Page 7: Hose & Regulator Specifications And Installation

    DO NOT attempt to connect griddle, as purchased for LP (propane) gas, to any other fuel supply source such as a natural gas line. For dual fuel griddles that can be converted to natural gas, a Even Embers conversion kit must be purchased and installed for use with natural gas. •...
  • Page 8: Leak Testing

    HOSE AND REGULATOR: Your griddle is equipped with a Type 1 connection device with the following features: 1. The system will not allow gas fl ow from the cylinder until a positive connection to the valve has been made. Note: The cylinder valve and all griddle burner knobs must be turned OFF before any connection is made or removed.
  • Page 9 DANGER To prevent fi re or explosion hazard: • DO NOT smoke or permit ignition sources in the area while conducting a leak test. • Perform test OUTDOORS in a well ventilated area that is protected from the wind. • Never perform a leak test with a match or open fl ame.
  • Page 10: Pre-Start Check List

    PRE-START CHECK LIST: DANGER Property damage, bodily harm, severe burns, and death could result from failure to follow these safety steps. These steps should be performed after the griddle has been assembled and prior to each use. DO NOT operate this griddle until you have read and understand ALL of the warnings and instructions in this manual.
  • Page 11: Operating The Griddle

    To achieve a dark surface, start cooking on your griddle top which will help create a nicely seasoned griddle top. Note: Your Even Embers griddle was pre-treated with vegetable oil as a protective coating. This coating may leave a discoloration on the griddle, but this will not affect the seasoning process.
  • Page 12: Proper Care And Maintenance

    CLEANING YOUR GRIDDLE: First Time Cleaning – your Even Embers Griddle has been pre-treated with a vegetable oil coating to prevent rust and damage during shipping. For fi rst time use, wash the griddle with hot and soapy water. This is the ONLY time you should use soap on the griddle cooking surface.
  • Page 13 BURNER CLEANING AND MAINTENANCE: • Keep the appliance free and clear of combustible materials, gasoline and other fl ammable vapors and liquids. • Keep the ventilation openings of the cylinder enclosure free and clear of debris. • Visually check burner fl ames for proper operation (see pictorial in “Burner Assembly/Maintenance” under Proper Care and Maintenance).
  • Page 14: Transporting And Storage

    TRANSPORTING AND STORAGE: WARNING • Never move a griddle when hot or in use. • Make sure that cylinder valve is closed and burner knobs are in the off position. • DO NOT store a spare LP gas cylinder (fi lled or empty) under or near the griddle. •...
  • Page 15: Trouble Shooting

    TROUBLE SHOOTING: Problem Possible Cause Prevention/Cure Burner will not light LP gas tank valve is closed Make sure regulator is securely attached to the LP gas tank, turn LP gas tank valve to “OPEN” LP gas tank is low or empty Check if LP gas tank is empty.
  • Page 16: Griddle Cooking Tips

    Problem Possible Cause Prevention/Cure Flame blows out High or gusting winds Do not use griddle in high winds Low on LP gas Replace or refi ll LP gas tank Burner holes may be obstructed Refer to “Burner Assembly/Maintenance” instructions Flow limiting device tripped Refer to “Regulator Resetting Procedure”...
  • Page 17: Assembly Instructions

    READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR GRIDDLE. WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN AS SEM BLING THIS UNIT. The following tools are required to assemble this Even Embers 5 Burner Gas Griddle: • Phillips Screwdriver PARTS LIST:...
  • Page 18 NOTE: Some screws are pre-assembled to the griddle. You may need to loosen some screws partially while others may need to be removed to assemble parts.
  • Page 19 Remove four screws from front legs . Loosen four screws from front legs . Attach front panel to front legs Remove 4 screws using four screws. Attach lower leg brace over keyholes. Tighten all screws. Loosen 4 screws Loosen eight screws on rear legs Attach upper and lower leg braces...
  • Page 20 Lock the casters . Attach casters to all four legs. Unlocked Locked Remove 4 screws Remove four screws from sides of griddle body. Set griddle body assembly on cart frame. Secure using four screws removed in Step 5.
  • Page 21 Attach grease tube griddle body using pre- attached screws. Hang grease bucket from grease tube. Place griddle on cart frame. Griddle legs should fi t into holes on top of cart frame. Note: Make sure the hole in the griddle top aligns with the grease tube.
  • Page 22 Attach lid to griddle using two lid hinge pins and nuts Attach accessory hooks to left side table Attach side table brackets to cart frame using four pre-attached screws. Install two lower shelf hinge pins , then attach left side table and install two upper shelf hinge pins secure.
  • Page 23 Attach accessory hooks to right side table Attach side table brackets to cart frame using four pre-attached screws. Install two lower shelf hinge pins , then attach right side table and install two upper shelf hinge pins secure. Install towel rack bar left front leg bracket.
  • Page 24 Even Embers GAS2540AS Assembled...
  • Page 25 WARRANTY The Boltz Group warrants to the original pur chas er that the Even Embers 5 Burner Gas Griddle is free from defects due to workmanship or materials for: Ten-year: on stainless steel tube burners Three-year: on all other stainless steel parts One-year: on valves, frame, housing, cart, igniter, griddle and other related parts The Boltz Group’s obligations under this warranty are limited to the following guidelines:...

Table of Contents