Summary of Contents for Argos CUGGL
- Page 1 CUGGL EXTRA WIDE SAFETY GATE care & instruction manual KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Cat.No.: 8180197...
- Page 2 To clean: Use mild soap and wipe with a damp cloth. 111cm-117cm you will need to use the supplied 12cm Adult assembly required. and 24cm extension piece(s). For openings 81cm-87cm; 93cm-99cm; 105cm-111cm you will need to use 6cm 8344816 Cuggl Safety gate extension white (sold separately). Cat. No.: 8180197...
- Page 3 If you need help or have any question, call the Argos Aftersales Helpline: 0345 640 2020 Cat. No.: 8180197...
- Page 4 12cm 24cm 99cm-105cm 105cm-111cm 111cm-117cm The 6cm extension, Cat No. 8344816 Cuggl Safety Gate Extensions White is sold separately. Please install the gate and the extensions according to the above installation images. Only use one extension per side. Cat.No.: 8180197...
- Page 5 If the safety barrier is used at the bottom of the stairs, it should be positioned at the front of the lowest tread possible. The safety barrier should not be used at the top of stairs or steps. WARNING Don’t install a second gate above the first as there is a risk of serious injury or death.
- Page 6 Use either the extension piece(s) supplied with the gate and/or 8344816 Cuggl Safety Gate Extension White (sold separately) to span the width of the opening. F（1X） I（1x） Insert steel bolt (G) into the required extension piece(s) in the orientation as shown above. For the 12cm & 24cm extension piece(s) insert the shorter of the two ends of steel bolt (G) into the safety gate.
- Page 7 Pre-install the gate, extension piece(s) and the wall cups into the desired position. Cut the plastic cable tie 0-3mm Ensure the gap below 3 mm Ensure that the gap is sufficient to allow the lock to operate smoothly. ATTENTION! Max1.0mm check the gap and hand cog regularly to ensure...
- Page 8 Please use the spanner to install the gate securely. Max1.0mm 15-58mm 15-58mm GREEN Note: The gate should not move when the button is pressed. Further backward or forwards adjustment of the top wall cup on the lock side may be required if this happens. Check that the lock operates, and the gate opens and closes correctly.
- Page 9 The position of the top wall cup on the lock side may need to be adjusted backwards or forwards so that the gate and frame are perfectly aligned as per the above image. Adjust the vertical alignment by following the images above. Check that the gap between the handle and the lock is less than 1mm and the gate operates smoothly.
- Page 10 Remove the gate and line up the wall cups (C) with the marks on the walls. With the gate still installed, mark round the Mark the screw position onto the wall. wall cups (C) with a pencil. Secure the wall cups (C) in place using screws (A) provided or suitable screws.
-
Page 11: Customer Care
Customer care Your child’s safety is your responsibility If you have a problem with this product or require replacement parts, please contact your nearest Argos store or telephone the Argos Customer Care Team on 0345 640 2020 Alternatively write to: Customer Care Team Produced in China.
Need help?
Do you have a question about the CUGGL and is the answer not in the manual?
Questions and answers