Advertisement
How to Operate
1. Battery Installation
Insert one button CR2032 3V battery to remote control tightly based on the direction of the
terminal. If it does not use for a long time, pull the battery out from the remote control.
2. Start and Speed Setting
Press "ON/SPEED" button to turn on the product first then other buttons and functions can
be available. While the product is working, wind speed can be adjustable by pressing
"ON/SPEED" button. It works as: Low Mid High Low, repeating.
3. Mode Setting
On the normal working status, press "MODE" button then it will be: NORMAL NATURAL
SLEEP NORMAL repeating and the LED will show the mode type accordingly.
1) NORMAL MODE
The product will work at set speed constantly.
2) NATURAL MODE
The product will work at High-Mid- Low speed and repeat automatically (as the diagram
showing below).
M I D
M I D
M I D
3) SLEEP MODE
The product will switch to ON and OFF at set speed. Speed will change as follows with
each 30 minutes.
[High]
High Mid Low High Mid Low, repeating
[Mid]
Mid Low Mid Low, repeating
[Low]
The product will keep working at Low speed switching ON and OFF.
*The cycle will continue until the preset time is reached or the product is turned off.
5
Advertisement
